Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mise à jour V2 sur carte ADVANTECH ou N450
#61
J'ai remarque une lenteur du tactile aujourd'hui.
Je ne peu pas faire deux clics successifs je suis obliger d'attendre entre les deux.
Sur la page d'accueil de Ma Maison, il est devenu impossible de faire le slide pour naviguer dans les pages des scénarios disponibles et l'état de la maison.

Ci dessous le log de Calaos_Home sur lequel figure plusieurs erreurs ???

-- Logs begin at Sat 2015-01-03 21:50:53 CET, end at Sat 2015-01-03 20:53:22 CET. --
Jan 03 21:50:54 n450 systemd[1]: Starting Calaos home automation touchscreen UI...
Jan 03 21:50:54 n450 systemd[1]: Started Calaos home automation touchscreen UI.
Jan 03 21:50:58 n450 calaos_home.sh[401]: INF<427>:calaos_home Prefix.cpp:33 Prefix:Tonguerefix(int, char**)() Install preffix is /usr
Jan 03 21:50:58 n450 calaos_home.sh[401]: INF<427>:calaos_home Prefix.cpp:34 Prefix:Tonguerefix(int, char**)() Binaries directory is /usr/bin
Jan 03 21:50:58 n450 calaos_home.sh[401]: INF<427>:calaos_home Prefix.cpp:35 Prefix:Tonguerefix(int, char**)() Libraries directory is /usr/lib
Jan 03 21:50:58 n450 calaos_home.sh[401]: INF<427>:calaos_home Prefix.cpp:36 Prefix:Tonguerefix(int, char**)() Data directory is /usr/share/calaos
Jan 03 21:50:58 n450 calaos_home.sh[401]: INF<427>:calaos_home Prefix.cpp:37 Prefix:Tonguerefix(int, char**)() Locale directory is /usr/share/locale
Jan 03 21:50:58 n450 calaos_home.sh[401]: INF<427>:calaos_home main.cpp:66 int main(int, char**)() Current locale : fr_FR.UTF-8
Jan 03 21:50:58 n450 calaos_home.sh[401]: INF<427>:calaos_home Utils.cpp:505 void Utils::initConfigOptions(char*, char*, bool)() Using config path: /etc/calaos/
Jan 03 21:50:58 n450 calaos_home.sh[401]: INF<427>:calaos_home Utils.cpp:506 void Utils::initConfigOptions(char*, char*, bool)() Using cache path: /home/root/.cache/ca
laos/
Jan 03 21:50:58 n450 calaos_home.sh[401]: INF<427>:calaos_home ApplicationMain.cpp:44 ApplicationMain::ApplicationMain(int, char**)() Calaos Home, starting...
Jan 03 21:50:58 n450 calaos_home.sh[401]: INF<427>:calaos_home ApplicationMain.cpp:61 ApplicationMain::ApplicationMain(int, char**)() Using specified theme file: /tmp/
calaos_home.edj
Jan 03 21:50:59 n450 calaos_home.sh[401]: ERR<427>:elementary elm_button.c:341 elm_button_add() could not add 0x8a7e748 as sub object of 0x857fb50
Jan 03 21:50:59 n450 calaos_home.sh[401]: ERR<427>:elementary elm_icon.c:766 elm_icon_add() could not add 0x8a7f668 as sub object of 0x857fb50
Jan 03 21:50:59 n450 calaos_home.sh[401]: ERR<427>:elementary elm_button.c:341 elm_button_add() could not add 0x8a80588 as sub object of 0x857fb50
Jan 03 21:50:59 n450 calaos_home.sh[401]: ERR<427>:elementary elm_icon.c:766 elm_icon_add() could not add 0x8a98000 as sub object of 0x857fb50
Jan 03 21:50:59 n450 calaos_home.sh[401]: ERR<427>:ecore_con ecore_con.c:1220 _ecore_con_event_server_error() Le réseau n'est pas accessible
Jan 03 21:50:59 n450 calaos_home.sh[401]: ERR<427>: ecore_con.c:690 ecore_con_server_send() safety check failed: svr->delete_me is true
Jan 03 21:50:59 n450 calaos_home.sh[401]: INF<427>:calaos_module Modules.cpp:50 void ModuleManager::SearchModules()() ModuleManager: searching modules in: /usr/lib/cal
aos/widgets
Jan 03 21:50:59 n450 calaos_home.sh[401]: INF<427>:calaos_module Modules.cpp:131 void ModuleManager::SearchModules()() ModuleManager: found module: Horloge
Jan 03 21:50:59 n450 calaos_home.sh[401]: INF<427>:calaos_module Modules.cpp:131 void ModuleManager::SearchModules()() ModuleManager: found module: Notes
Jan 03 21:50:59 n450 calaos_home.sh[401]: ERR<427>:elementary elm_button.c:341 elm_button_add() could not add 0x8ad2178 as sub object of 0x8aba768
Jan 03 21:50:59 n450 calaos_home.sh[401]: ERR<427>:elementary elm_icon.c:766 elm_icon_add() could not add 0x8ad3098 as sub object of 0x8aba768
Jan 03 21:50:59 n450 calaos_home.sh[401]: INF<427>:calaos_module Modules.cpp:174 bool ModuleManager::createModuleInstance(Evas*, ModuleDef&, ModuleDef&, std:Confusedtring)()
ModuleManager: New module instance: Horloge
Jan 03 21:50:59 n450 calaos_home.sh[401]: INF<427>:calaos_module Modules.cpp:175 bool ModuleManager::createModuleInstance(Evas*, ModuleDef&, ModuleDef&, std:Confusedtring)()
ModuleManager: module icon: /usr/share/calaos/widgets/clock/icon.edj
Jan 03 21:50:59 n450 calaos_home.sh[401]: ERR<427>:elementary elm_button.c:341 elm_button_add() could not add 0x8af8a00 as sub object of 0x8af72a0
Jan 03 21:50:59 n450 calaos_home.sh[401]: ERR<427>:elementary elm_icon.c:766 elm_icon_add() could not add 0x8af9920 as sub object of 0x8af72a0
Jan 03 21:50:59 n450 calaos_home.sh[401]: INF<427>:calaos_module Modules.cpp:174 bool ModuleManager::createModuleInstance(Evas*, ModuleDef&, ModuleDef&, std:Confusedtring)()
ModuleManager: New module instance: Notes
Jan 03 21:50:59 n450 calaos_home.sh[401]: INF<427>:calaos_module Modules.cpp:175 bool ModuleManager::createModuleInstance(Evas*, ModuleDef&, ModuleDef&, std:Confusedtring)()
ModuleManager: module icon: /usr/share/calaos/widgets/note/icon.edj
Jan 03 20:51:03 n450 calaos_home.sh[401]: ERR<427>:elementary elm_button.c:341 elm_button_add() could not add 0x8a7eb68 as sub object of 0x8a7ef88
Jan 03 20:51:03 n450 calaos_home.sh[401]: ERR<427>:elementary elm_icon.c:766 elm_icon_add() could not add 0x8b5ac50 as sub object of 0x8a7ef88
Jan 03 20:51:03 n450 calaos_home.sh[401]: ERR<427>:elementary elm_button.c:341 elm_button_add() could not add 0x8c24620 as sub object of 0x8b5bb70
Jan 03 20:51:03 n450 calaos_home.sh[401]: ERR<427>:elementary elm_icon.c:766 elm_icon_add() could not add 0x8c25540 as sub object of 0x8b5bb70
Jan 03 20:51:03 n450 calaos_home.sh[401]: ERR<427>:elementary elm_button.c:341 elm_button_add() could not add 0x8c26880 as sub object of 0x8c26460
Jan 03 20:51:03 n450 calaos_home.sh[401]: ERR<427>:elementary elm_icon.c:766 elm_icon_add() could not add 0x8c277d8 as sub object of 0x8c26460
Jan 03 20:51:03 n450 calaos_home.sh[401]: ERR<427>:edje edje_external.c:41 edje_object_part_external_object_get() no part 'button.save_room'
Jan 03 20:51:03 n450 calaos_home.sh[401]: ERR<427>: elm_main.c:951 elm_object_part_text_set() safety check failed: obj == NULL
Jan 03 20:51:03 n450 calaos_home.sh[401]: INF<427>:calaos_network models/CalaosModel.cpp:54 void CalaosModel::discover_found(std:Confusedtring)() CalaosModel: found server:
127.0.0.1
Jan 03 20:51:03 n450 calaos_home.sh[401]: INF<427>:calaos_network models/CalaosModel.cpp:93 void CalaosModel::connection_ok()() CalaosModel: Connection success, loadin
g home
Jan 03 20:51:06 n450 calaos_home.sh[401]: ERR<427>:elementary elm_button.c:341 elm_button_add() could not add 0x8a80dc8 as sub object of 0x8a809a8
Jan 03 20:51:06 n450 calaos_home.sh[401]: ERR<427>:elementary elm_icon.c:766 elm_icon_add() could not add 0x8b5b750 as sub object of 0x8a809a8
Jan 03 20:51:06 n450 calaos_home.sh[401]: ERR<427>:elementary elm_button.c:341 elm_button_add() could not add 0x8b5a2b0 as sub object of 0x8b5a6d0
Jan 03 20:51:06 n450 calaos_home.sh[401]: ERR<427>:elementary elm_icon.c:766 elm_icon_add() could not add 0x8a99760 as sub object of 0x8b5a6d0
Jan 03 20:51:11 n450 calaos_home.sh[401]: INF<427>:calaos_network models/CalaosModel.cpp:122 void CalaosModel::load_done()() CalaosModel: Home loaded
Jan 03 20:51:15 n450 calaos_home.sh[401]: ERR<427>:elementary elm_button.c:341 elm_button_add() could not add 0x8eda048 as sub object of 0x8ad2598
Jan 03 20:51:15 n450 calaos_home.sh[401]: ERR<427>:elementary elm_icon.c:766 elm_icon_add() could not add 0x8ed8368 as sub object of 0x8ad2598
Jan 03 20:51:15 n450 calaos_home.sh[401]: ERR<427>:elementary elm_button.c:341 elm_button_add() could not add 0x8ed9808 as sub object of 0x8ed93e8
Jan 03 20:51:15 n450 calaos_home.sh[401]: ERR<427>:elementary elm_icon.c:766 elm_icon_add() could not add 0x8c3f6b0 as sub object of 0x8ed93e8
Jan 03 20:51:15 n450 calaos_home.sh[401]: ERR<427>:elementary elm_button.c:341 elm_button_add() could not add 0x8c40b50 as sub object of 0x8c405d0
Jan 03 20:51:15 n450 calaos_home.sh[401]: ERR<427>:elementary elm_icon.c:766 elm_icon_add() could not add 0x8ebd830 as sub object of 0x8c405d0
Jan 03 20:51:15 n450 calaos_home.sh[401]: ERR<427>:edje edje_external.c:41 edje_object_part_external_object_get() no part 'button.save_room'
Jan 03 20:51:15 n450 calaos_home.sh[401]: ERR<427>: elm_main.c:951 elm_object_part_text_set() safety check failed: obj == NULL
Jan 03 20:51:16 n450 calaos_home.sh[401]: ERR<427>:elementary elm_button.c:341 elm_button_add() could not add 0x907c410 as sub object of 0x907bff0
Jan 03 20:51:16 n450 calaos_home.sh[401]: ERR<427>:elementary elm_button.c:341 elm_button_add() could not add 0x907de30 as sub object of 0x907da10
Jan 03 20:51:16 n450 calaos_home.sh[401]: ERR<427>:elementary elm_button.c:341 elm_button_add() could not add 0x90ad618 as sub object of 0x90ad1f8
Jan 03 20:51:16 n450 calaos_home.sh[401]: ERR<427>:elementary elm_button.c:341 elm_button_add() could not add 0x90af038 as sub object of 0x90aec18
Jan 03 20:52:31 n450 calaos_home.sh[401]: killall: eskiss: no process killed
Steeve MARTINS
Calaos User

Calaos v3 sur Intel BOXNUC5CPYH | Wago 750-842 (2.0)| Eco-Devices
Reply
#62
j'ai reactiver le curseur et j'ai pu réellement constater la lenteur du curseur. Il ne me suis pas quand je glisse le doigt sur la dalle tactile.
J'ai désactivé, reactivé et recalibré l'interface tactile sans changement...
Steeve MARTINS
Calaos User

Calaos v3 sur Intel BOXNUC5CPYH | Wago 750-842 (2.0)| Eco-Devices
Reply
#63
A tout hasard, est-ce que tu peux lancer un "top" en SSH ?
Le tableau affiche la conso cpu des processus, est-ce qu'il y en a un qui prend genre 100% tout le temps ?
Calaos v1.1.20 sur Advantech x86 | Calaos Home écran tactile RS232 | Wago 750-841 | DMX RGB LED
Calaos-OS v2.0 sur Advantech x86 | Clé USB
Squeezebox | Raspberry & Scripts maison
Reply
#64
Replantage de CALAOS V2 à l'instant ....

J'ai simplement rechargé une modif de conf pour affiner la maison.
Resultat :
- Serveur planté
- après reboot plus possible de se connecter au interface avec login/MP j'ai de nouveau la même erreur que précedement.

et sur l'ecran tactile l'interface est visible, le tactile marche mais en cliquant sur myhome j'ai loading qui tourne en boucle

et toute la maison est plantée
Calaos v1.1.20 sur Advantech | Ecran tactile | Wago 750-849 | DALI halogène + LED RGB | Intrusion KSENIA
Squeezebox on Raspberry | Zibase Pro (Enocean+Zwave+Oregon) | Ecodevice | Script LUA | Hyperviseur en court de test
Test v2 RC2 automate + serveur sur réseau identique
Reply
#65
@Tom
Si tu as un clavier branché sur le serveur, fais control-alt-F1, ça t'enlève l'interface graphique et arrive en console. Connexion en root, et tu peux faire ce que tu veux, en particulier un "reboot" (plus propre qu'un power off/on).

Peux-tu faire un ifconfig ? un ping de ton automate et de ta box internet stp ?
J'ai l'impression que tes plantages sont une conséquence des problèmes réseaux non corrigés sur ta version.
Calaos v1.1.20 sur Advantech x86 | Calaos Home écran tactile RS232 | Wago 750-841 | DMX RGB LED
Calaos-OS v2.0 sur Advantech x86 | Clé USB
Squeezebox | Raspberry & Scripts maison
Reply
#66
@arnaud
Je n'ai malheureusement pas de clavier à brancher dessus
en me connectant en ssh depuis mon PC
Voici le ifconfig
Code:
root@n450:~# ifconfig
enp0s25   Link encap:Ethernet  HWaddr 00:0B:AB:45:29:77  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:23 Memory:feac0000-feae0000

enp3s0    Link encap:Ethernet  HWaddr 00:0B:AB:45:29:78  
          inet addr:192.168.1.100  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::20b:abff:fe45:2978/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:151 errors:0 dropped:0 overruns:0 frame:0
          TX packets:107 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:17605 (17.1 KiB)  TX bytes:21616 (21.1 KiB)
          Interrupt:16 Memory:febe0000-fec00000

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:84 errors:0 dropped:0 overruns:0 frame:0
          TX packets:84 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4696 (4.5 KiB)  TX bytes:4696 (4.5 KiB)

ping automate
root@n450:~# ping 192.168.1.99
PING 192.168.1.99 (192.168.1.99): 56 data bytes
64 bytes from 192.168.1.99: seq=0 ttl=64 time=0.577 ms

ping box
root@n450:~# ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1): 56 data bytes
64 bytes from 192.168.1.1: seq=0 ttl=64 time=0.931 ms

Pour info j'ai branché uniquement le port exterieur du serveur sur le réseau et le port du haut sur l'automate
Calaos v1.1.20 sur Advantech | Ecran tactile | Wago 750-849 | DALI halogène + LED RGB | Intrusion KSENIA
Squeezebox on Raspberry | Zibase Pro (Enocean+Zwave+Oregon) | Ecodevice | Script LUA | Hyperviseur en court de test
Test v2 RC2 automate + serveur sur réseau identique
Reply
#67
Le réseau semble bon et tu peux accéder à l'automate et internet, good.

Par contre, tu indiques:
Quote:Pour info j'ai branché uniquement le port exterieur du serveur sur le réseau et le port du haut sur l'automate

D'après ce que je comprends de ta configuration, tu n'utilises qu'un port réseau, l'autre ne sert à rien, donc comme te l'a indiqué Steeve, ça serait bien de ne pas brancher ce qui sert à rien. C'est source d'anomalie.

Peux-tu faire un :
Code:
ps -e | grep calaos
systemctl status calaos-server
systemctl status calaos-home

Tu indiques également:
Quote:J'ai simplement rechargé une modif de conf pour affiner la maison.
As-tu essayé en rechargeant la configuration précédente ? Celle qui fonctionnait bien ?
Il peut arriver que ta configuration soit mauvaise (erreur humaine ou bug de calaos installer éventuellement).
Calaos v1.1.20 sur Advantech x86 | Calaos Home écran tactile RS232 | Wago 750-841 | DMX RGB LED
Calaos-OS v2.0 sur Advantech x86 | Clé USB
Squeezebox | Raspberry & Scripts maison
Reply
#68
@Arnaud
Voici le résultat de la fonction "top" en SSH
Premiére capture, l'écran tactile est en veille
Deuxième capture, je joue avec l'interface tactile

Je pense qu'il y a un problème avec Calaos_Home



J'ai également lancé la commande "systemctl status calaos-home"
Le résultat contient que des erreurs ?????

calaos-home.service - Calaos home automation touchscreen UI
Loaded: loaded (/lib/systemd/system/calaos-home.service; enabled)
Active: active (running) since Sun 2015-01-04 20:12:33 CET; 8min ago
Main PID: 25690 (calaos_home.sh)
CGroup: /system.slice/calaos-home.service
ââ25690 /bin/sh /usr/bin/calaos_home.sh
ââ25693 calaos_home --theme /tmp/calaos_home.edj --config /etc/calaos --cache /home/root/.cache/calaos --set-elm-config

Jan 04 20:13:39 n450 calaos_home.sh[25690]: ERR<25693>:elementary elm_icon.c:766 elm_icon_add() could not add 0x8ee1668 as sub object of 0x90486d0
Jan 04 20:13:39 n450 calaos_home.sh[25690]: ERR<25693>:elementary elm_button.c:341 elm_button_add() could not add 0x8ee29a8 as sub object of 0x8ee2588
Jan 04 20:13:39 n450 calaos_home.sh[25690]: ERR<25693>:elementary elm_icon.c:766 elm_icon_add() could not add 0x8ee38c8 as sub object of 0x8ee2588
Jan 04 20:13:39 n450 calaos_home.sh[25690]: ERR<25693>:edje edje_external.c:41 edje_object_part_external_object_get() no part 'button.save_room'
Jan 04 20:13:39 n450 calaos_home.sh[25690]: ERR<25693>: elm_main.c:951 elm_object_part_text_set() safety check failed: obj == NULL
Jan 04 20:13:39 n450 calaos_home.sh[25690]: ERR<25693>:elementary elm_button.c:341 elm_button_add() could not add 0x9008498 as sub object of 0x9008078
Jan 04 20:13:39 n450 calaos_home.sh[25690]: ERR<25693>:elementary elm_button.c:341 elm_button_add() could not add 0x8b69aa8 as sub object of 0x8b69688
Jan 04 20:13:39 n450 calaos_home.sh[25690]: ERR<25693>:elementary elm_button.c:341 elm_button_add() could not add 0x8b6b4c8 as sub object of 0x8b6b0a8
Jan 04 20:13:39 n450 calaos_home.sh[25690]: ERR<25693>:elementary elm_button.c:341 elm_button_add() could not add 0x8b75338 as sub object of 0x8b74f18
Jan 04 20:14:44 n450 calaos_home.sh[25690]: killall: eskiss: no process killed


Attached Files Thumbnail(s)
       
Steeve MARTINS
Calaos User

Calaos v3 sur Intel BOXNUC5CPYH | Wago 750-842 (2.0)| Eco-Devices
Reply
#69
@steeve:

Bizarre ton soucis de ralentissement. J'ai jamais vu ca... Undecided
Tout a l'air normal par contre, les erreurs dans les logs ne sont pas importante, c'est des trucs liés au theme et aux EFL. Rien de grave donc...
Raoul,
Calaos Core Dev.
Calaos git sur NUC NUC5PPYH | Wago 750-849 | DALI RGB | Sondes NTC sur 750-464 | Sondes 1Wire DS18B20 avec adaptateur USB DS9490R | Nodes MySensors avec gateway USB | Ecran tactile ELO avec adaptateur USB/RS232 | Squeezebox Duet et Radio | Logitech Harmony Ultimate | Ampli Pioneer VSX921
Reply
#70
(01-04-2015, 05:51 PM)Arnaud Wrote: Peux-tu faire un :
Code:
ps -e | grep calaos
systemctl status calaos-server
systemctl status calaos-home

Voici les résultats :
Code:
root@n450:~# ps -e | grep calaos
  348 ?        00:00:00 calaos_home.sh
  375 ?        00:00:02 calaos_home
Code:
root@n450:~# systemctl status calaos-server
calaos-server.service - Calaos home automation server service
   Loaded: loaded (/lib/systemd/system/calaos-server.service; enabled)
   Active: failed (Result: start-limit) since Mon 2015-01-05 12:46:58 UTC; 2min 7s ago
  Process: 538 ExecStart=/usr/bin/calaos_server --config /etc/calaos --cache /home/root/.cache/calaos (code=exited, status=255)
  Process: 535 ExecStartPre=/bin/mkdir -p /home/root/.cache/calaos /etc/calaos (code=exited, status=0/SUCCESS)
 Main PID: 538 (code=exited, status=255)
   CGroup: /system.slice/calaos-server.service

Jan 05 12:46:58 n450 systemd[1]: Unit calaos-server.service entered failed ...e.
Jan 05 12:46:58 n450 systemd[1]: calaos-server.service holdoff time over, s...t.
Jan 05 12:46:58 n450 systemd[1]: Stopping Calaos home automation server ser.....
Jan 05 12:46:58 n450 systemd[1]: Starting Calaos home automation server ser.....
Jan 05 12:46:58 n450 systemd[1]: calaos-server.service start request repeat...t.
Jan 05 12:46:58 n450 systemd[1]: Failed to start Calaos home automation ser...e.
Jan 05 12:46:58 n450 systemd[1]: Unit calaos-server.service entered failed ...e.
Code:
root@n450:~# systemctl status calaos-home
calaos-home.service - Calaos home automation touchscreen UI
   Loaded: loaded (/lib/systemd/system/calaos-home.service; enabled)
   Active: active (running) since Mon 2015-01-05 12:46:50 UTC; 2min 49s ago
 Main PID: 348 (calaos_home.sh)
   CGroup: /system.slice/calaos-home.service
           ├─348 /bin/sh /usr/bin/calaos_home.sh
           └─375 calaos_home --theme /tmp/calaos_home.edj --config /etc/calao...

Jan 05 12:46:56 n450 calaos_home.sh[348]: INF<375>:calaos_module Modules.cpp...s
Jan 05 12:46:56 n450 calaos_home.sh[348]: ERR<375>:elementary elm_button.c:3...0
Jan 05 12:46:56 n450 calaos_home.sh[348]: ERR<375>:elementary elm_icon.c:766...0
Jan 05 12:46:56 n450 calaos_home.sh[348]: INF<375>:calaos_module Modules.cpp...s
Jan 05 12:46:56 n450 calaos_home.sh[348]: INF<375>:calaos_module Modules.cpp...j
Jan 05 12:46:56 n450 calaos_home.sh[348]: ERR<375>:elementary elm_button.c:3...0
Jan 05 12:46:56 n450 calaos_home.sh[348]: ERR<375>:elementary elm_icon.c:766...0
Jan 05 12:46:56 n450 calaos_home.sh[348]: INF<375>:calaos_module Modules.cpp...k
Jan 05 12:46:56 n450 calaos_home.sh[348]: INF<375>:calaos_module Modules.cpp...j
Jan 05 12:49:11 n450 calaos_home.sh[348]: killall: eskiss: no process killed
(01-04-2015, 05:51 PM)Arnaud Wrote: As-tu essayé en rechargeant la configuration précédente ? Celle qui fonctionnait bien ?

Il peut arriver que ta configuration soit mauvaise (erreur humaine ou bug de calaos installer éventuellement).

Non je ne peux plus rien chargé du tout. Calaos installer ne me prend plus mes login/mp
Calaos v1.1.20 sur Advantech | Ecran tactile | Wago 750-849 | DALI halogène + LED RGB | Intrusion KSENIA
Squeezebox on Raspberry | Zibase Pro (Enocean+Zwave+Oregon) | Ecodevice | Script LUA | Hyperviseur en court de test
Test v2 RC2 automate + serveur sur réseau identique
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)