J'ai pu récupérer un clavier PC pour le brancher, ça fonctionne
Les 2 interfaces sont reconnues mais sans IP.
connmanctl config ethernet_000c29f63a80_cable --ipv4 dhcp
configure bien la première, au moins en dynamique.
mais je n'arrive pas à mettre un IP fixe, en testant sur la 2éme interface.
Code:
root@n450:~# connmanctl services
*AO Wired ethernet_000bab451b08_cable
*A Wired ethernet_000bab451b09_cable
Code:
root@n450:~# connmanctl services ethernet_000bab451b09_cable
/net/connman/service/ethernet_000bab451b09_cable
Type = ethernet
Security = [ ]
State = idle
Favorite = True
Immutable = False
AutoConnect = True
Name = Wired
Ethernet = [ Method=auto, Interface=enp3s0, Address=00:0B:AB:45:1B:09, MTU=1500 ]
IPv4 = [ ]
IPv4.Configuration = [ Method=manual, Address=10.0.0.1, Netmask=255.255.255.0 ]
IPv6 = [ ]
IPv6.Configuration = [ Method=auto, Privacy=disabled ]
Nameservers = [ ]
Nameservers.Configuration = [ ]
Timeservers = [ ]
Timeservers.Configuration = [ ]
Domains = [ ]
Domains.Configuration = [ ]
Proxy = [ ]
Proxy.Configuration = [ ]
Provider = [ ]
Code:
root@n450:~# connmanctl services ethernet_000bab451b08_cable
/net/connman/service/ethernet_000bab451b08_cable
Type = ethernet
Security = [ ]
State = online
Favorite = True
Immutable = False
AutoConnect = True
Name = Wired
Ethernet = [ Method=auto, Interface=enp0s25, Address=00:0B:AB:45:1B:08, MTU=1500 ]
IPv4 = [ Method=dhcp, Address=192.168.0.67, Netmask=255.255.255.0, Gateway=192.168.0.254 ]
IPv4.Configuration = [ Method=dhcp ]
IPv6 = [ ]
IPv6.Configuration = [ Method=auto, Privacy=disabled ]
Nameservers = [ 192.168.0.254 ]
Nameservers.Configuration = [ ]
Timeservers = [ 192.168.0.254 ]
Timeservers.Configuration = [ ]
Domains = [ ]
Domains.Configuration = [ ]
Proxy = [ Method=direct ]
Proxy.Configuration = [ ]
Provider = [ ]
J'utilise la ligne:
Code:
connmanctl> config ethernet_000bab451b09_cable --ipv4 manual 10.0.0.1 255.255.255.0 192.168.0.254
Il semble bien lui affecter l'IP/Mask/Gw mais elle est en state=idle
Une idée ?!
