09-18-2017, 10:36 AM
Je ne sais plus vraiment ce dont tu as besoin pour faire avancer le truc ...
Alors dans le doute voici le contenu de mon dmesg après un démarrage :
=> La connexion de l'usb pour le coté tactile à eu lieu à partir de 207...
Et voici le lsusb -vvv :
Si tu as besoin d'autre chose, n'hésite pas.
Alors dans le doute voici le contenu de mon dmesg après un démarrage :
Code:
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.4.79 (ubuntu@calaos-os) (gcc version 4.8.1 (GCC) ) #1 PREEMPT Thu Sep 11 17:56:59 UTC 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun4i
[ 0.000000] Memory Reserved:
[ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
[ 0.000000] G2D : 0x50000000 - 0x50ffffff ( 16 MB)
[ 0.000000] LCD : 0x51000000 - 0x52ffffff ( 32 MB)
[ 0.000000] cma: CMA: reserved 192 MiB at 43c00000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] sunxi: Allwinner A10 revision C (AW1623/sun4i) detected.
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c088bf98, node_mem_map d3000000
[ 0.000000] DMA zone: 512 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65024 pages, LIFO batch:15
[ 0.000000] Normal zone: 1008 pages used for memmap
[ 0.000000] Normal zone: 128016 pages, LIFO batch:31
[ 0.000000] HighMem zone: 528 pages used for memmap
[ 0.000000] HighMem zone: 67056 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 783784k/783784k available, 264792k reserved, 270336K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc07f7030 (8125 kB)
[ 0.000000] .init : 0xc07f8000 - 0xc0824000 ( 176 kB)
[ 0.000000] .data : 0xc0824000 - 0xc0897320 ( 461 kB)
[ 0.000000] .bss : 0xc0897344 - 0xc0952b08 ( 750 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:128
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.006004] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
[ 0.050262] pid_max: default: 32768 minimum: 301
[ 0.053870] Mount-cache hash table entries: 512
[ 0.057744] Initializing cgroup subsys cpuacct
[ 0.061147] Initializing cgroup subsys devices
[ 0.064543] Initializing cgroup subsys freezer
[ 0.067787] Initializing cgroup subsys blkio
[ 0.071340] CPU: Testing write buffer coherency: ok
[ 0.078889] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.084436] Setting up static identity map for 0x4058a760 - 0x4058a7b8
[ 0.087328] devtmpfs: initialized
[ 0.089550] dummy:
[ 0.102728] NET: Registered protocol family 16
[ 0.110531] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.115840] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.119348] Init eGon pin module V2.0
[ 0.124767] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
[ 0.126872] Initialize DMAC OK
[ 0.134064] bio: create slab <bio-0> at 0
[ 0.137445] sunxi_gpio driver init ver 1.3
[ 0.142989] gpiochip_add: registered GPIOs 1 to 4 on device: A1X_GPIO
[ 0.146005] SCSI subsystem initialized
[ 0.148984] libata version 3.00 loaded.
[ 0.153575] usbcore: registered new interface driver usbfs
[ 0.157883] usbcore: registered new interface driver hub
[ 0.162011] usbcore: registered new device driver usb
[ 0.165657] Linux video capture interface: v2.00
[ 0.171193] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.174067] Bluetooth: Core ver 2.16
[ 0.177521] NET: Registered protocol family 31
[ 0.182824] Bluetooth: HCI device and connection manager initialized
[ 0.186656] Bluetooth: HCI socket layer initialized
[ 0.190673] Bluetooth: L2CAP socket layer initialized
[ 0.194513] Bluetooth: SCO socket layer initialized
[ 0.199989] cfg80211: Calling CRDA to update world regulatory domain
[ 0.204418] Switching to clocksource aw_64bits_counter
[ 0.206450] FS-Cache: Loaded
[ 0.208563] CacheFiles: Loaded
[ 0.217886] NET: Registered protocol family 2
[ 0.224154] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.230995] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.238210] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.244278] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.246463] TCP: reno registered
[ 0.251268] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.256503] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.260003] NET: Registered protocol family 1
[ 0.265137] RPC: Registered named UNIX socket transport module.
[ 0.268851] RPC: Registered udp transport module.
[ 0.272507] RPC: Registered tcp transport module.
[ 0.277895] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.282953] audit: initializing netlink socket (disabled)
[ 0.286646] type=2000 audit(0.279:1): initialized
[ 0.290711] highmem bounce pool size: 64 pages
[ 0.299600] VFS: Disk quotas dquot_6.5.2
[ 0.304972] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.310635] NFS: Registering the id_resolver key type
[ 0.314830] NTFS driver 2.1.30 [Flags: R/W].
[ 0.318165] fuse init (API version 7.18)
[ 0.321542] msgmni has been set to 1386
[ 0.331587] alg: comp: Compression test 1 failed for lzo-generic: output len = 57
[ 0.334732] alg: No test for stdrng (krng)
[ 0.341388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.344272] io scheduler noop registered
[ 0.347494] io scheduler deadline registered
[ 0.351254] io scheduler cfq registered (default)
[ 0.355890] sunxi disp driver loaded (/dev/disp api 1.0)
[ 0.398679] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.402755] [uart]: used uart info.: 0x01
[ 0.407342] [uart]: serial probe 0 irq 1 mapbase 0x01c28000
[ 0.433634] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[ 1.051478] console [ttyS0] enabled
[ 1.057378] G2D: drv_g2d_init
[ 1.065036] G2D: g2dmem: g2d_start=50000000, g2d_size=1000000
[ 1.074019] G2D: head:d0000000,tail:d1000000
[ 1.081624] G2D: Module initialized.major:251
[ 1.089628] [drm] Initialized drm 1.1.0 20060810
[ 1.096852] brd: module loaded
[ 1.104103] loop: module loaded
[ 1.110620] [NAND] nand driver version: 0x2 0x9
[ 1.150795] Dev Sunxi softw311 nand: part 1, start 32768, size 32768
[ 1.162494] Dev Sunxi softw311 nand: part 2, start 65536, size 32768
[ 1.174157] Dev Sunxi softw311 nand: part 3, start 98304, size 65536
[ 1.186074] Dev Sunxi softw311 nand: part 4, start 163840, size 1048576
[ 1.198339] Dev Sunxi softw311 nand: part 5, start 1212416, size 3145728
[ 1.210520] Dev Sunxi softw311 nand: part 6, start 4358144, size 32768
[ 1.222526] Dev Sunxi softw311 nand: part 7, start 4390912, size 65536
[ 1.234616] Dev Sunxi softw311 nand: part 8, start 4456448, size 262144
[ 1.246706] Dev Sunxi softw311 nand: part 9, start 4718592, size 32768
[ 1.258971] Dev Sunxi softw311 nand: part 10, start 4751360, size 1048576
[ 1.271497] Dev Sunxi softw311 nand: part 11, start 5799936, size 9764864
[ 1.284975] nand: nanda nandb nandc nandd nande nandf nandg nandh nandi nandj nandk
[ 1.296065] [NAND]nand driver, ok.
[ 1.302986] sunxi_emac Using mii phy on PortA
[ 1.321970] sunxi_emac Using MAC from FEX: 00:ce:39:b6:25:7e
[ 1.334736] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.346633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.355083] [sw-ehci1]: open clock
[ 1.381074] [sw-ehci1]: Set USB Power ON
[ 1.391438] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.404935] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
[ 1.417617] sw-ehci sw-ehci.1: irq 39, io mem 0x01c14000
[ 1.438859] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
[ 1.446864] ehci_irq: port change detect
[ 1.454007] hub 1-0:1.0: USB hub found
[ 1.460678] hub 1-0:1.0: 1 port detected
[ 1.467043] [sw-ohci1]: open clock
[ 1.496485] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 1.509633] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
[ 1.520980] sw-ohci sw-ohci.1: irq 64, io mem 0x01c14400
[ 1.591653] hub 2-0:1.0: USB hub found
[ 1.598324] hub 2-0:1.0: 1 port detected
[ 1.604663] [sw-ehci2]: open clock
[ 1.630640] [sw-ehci2]: Set USB Power ON
[ 1.640999] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.654491] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
[ 1.666868] sw-ehci sw-ehci.2: irq 40, io mem 0x01c1c000
[ 1.789894] usb 1-1: new high-speed USB device number 2 using sw-ehci
[ 1.818850] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
[ 1.826861] ehci_irq: port change detect
[ 1.833995] hub 3-0:1.0: USB hub found
[ 1.840659] hub 3-0:1.0: 1 port detected
[ 1.847021] [sw-ohci2]: open clock
[ 1.876465] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 1.889612] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
[ 1.901029] sw-ohci sw-ohci.2: irq 65, io mem 0x01c1c400
[ 1.971671] hub 4-0:1.0: USB hub found
[ 1.978338] hub 4-0:1.0: 1 port detected
[ 1.986343] Initializing USB Mass Storage driver...
[ 1.996367] usbcore: registered new interface driver usb-storage
[ 2.006013] USB Mass Storage support registered.
[ 2.015594] usbcore: registered new interface driver ums-alauda
[ 2.026562] usbcore: registered new interface driver ums-cypress
[ 2.037601] usbcore: registered new interface driver ums-datafab
[ 2.049045] usbcore: registered new interface driver ums_eneub6250
[ 2.058082] hub 1-1:1.0: USB hub found
[ 2.066851] usbcore: registered new interface driver ums-freecom
[ 2.075862] hub 1-1:1.0: 4 ports detected
[ 2.084808] usbcore: registered new interface driver ums-isd200
[ 2.095833] usbcore: registered new interface driver ums-jumpshot
[ 2.106750] usbcore: registered new interface driver ums-karma
[ 2.117699] usbcore: registered new interface driver ums-onetouch
[ 2.128827] usbcore: registered new interface driver ums-realtek
[ 2.139776] usbcore: registered new interface driver ums-sddr09
[ 2.150632] usbcore: registered new interface driver ums-sddr55
[ 2.161401] usbcore: registered new interface driver ums-usbat
[ 2.172378] usbcore: registered new interface driver usbserial
[ 2.183744] usbcore: registered new interface driver usbserial_generic
[ 2.194312] USB Serial support registered for generic
[ 2.289889] usb 3-1: new high-speed USB device number 2 using sw-ehci
[ 2.450352] usbserial: USB Serial Driver core
[ 2.459358] usbcore: registered new interface driver cp210x
[ 2.469090] USB Serial support registered for cp210x
[ 2.478860] usbcore: registered new interface driver ftdi_sio
[ 2.489989] USB Serial support registered for FTDI USB Serial Device
[ 2.501280] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[ 2.511762] usbcore: registered new interface driver ir-usb
[ 2.521592] USB Serial support registered for IR Dongle
[ 2.530137] ir_usb: v0.5:USB IR Dongle driver
[ 2.539085] usbcore: registered new interface driver pl2303
[ 2.548614] USB Serial support registered for pl2303
[ 2.558256] mousedev: PS/2 mouse device common for all mice
[ 2.566003] [kpad]: sw keypad init
[ 2.573864] sw keypad fetch keypad uning configuration failed
[ 2.586241] keypad: cannot find using configuration, return without doing anything!
[ 2.599570] usb 1-1.3: new full-speed USB device number 3 using sw-ehci
[ 2.611515] input: sun4i-keyboard as /devices/virtual/input/input0
[ 2.622795] input: sunxi-ir as /devices/virtual/input/input1
[ 2.629932] IR Initial OK
[ 2.638106] ===========================hv_keypad_init=====================
[ 2.648433] ========HV Inital ===================
[ 2.657056] tkey_fetch_sysconfig_para: tkey_unused.
[ 2.669289] hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0
[ 2.683599] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[ 2.692228] i2c /dev entries driver
[ 2.699276] config i2c gpio with gpio_config api
[ 2.709556] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
[ 2.719238] i2c i2c-0: Invalid probe address 0x00
[ 2.726980] I2C: i2c-0: AW16XX I2C adapter
[ 2.736598] lirc_dev: IR Remote Control driver registered, major 250
[ 2.746572] IR NEC protocol handler initialized
[ 2.754894] IR RC5(x) protocol handler initialized
[ 2.763242] IR RC6 protocol handler initialized
[ 2.771305] IR JVC protocol handler initialized
[ 2.779434] IR Sony protocol handler initialized
[ 2.788605] IR RC5 (streamzap) protocol handler initialized
[ 2.797845] IR SANYO protocol handler initialized
[ 2.807408] IR MCE Keyboard/mouse protocol handler initialized
[ 2.816688] IR LIRC bridge handler initialized
[ 2.822943] [ace_drv] start!!!
[ 2.828332] [ace_drv] init end!!!
[ 2.833363] [pa_drv] start!!!
[ 2.838526] [pa_drv] init end!!!
[ 2.844349] axp20_ldo1: 1300 mV
[ 2.853618] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
[ 2.863715] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
[ 2.874066] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
[ 2.884222] axp20_buck2: 700 <--> 2275 mV at 1400 mV
[ 2.894444] axp20_buck3: 700 <--> 3500 mV at 1250 mV
[ 2.904301] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
[ 2.918963] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input2
[ 2.947151] axp20_ldo2: Failed to create debugfs directory
[ 2.957318] sunxi_wdt: sunxi WatchDog Timer Driver v1.0
[ 2.967403] sunxi_wdt: initialized (timeout=23s, nowayout=0)
[ 2.976477] Bluetooth: HCI UART driver ver 2.2
[ 2.984669] Bluetooth: HCI H4 protocol initialized
[ 2.993378] Bluetooth: HCI BCSP protocol initialized
[ 3.002002] Bluetooth: HCILL protocol initialized
[ 3.009884] cpuidle: using governor ladder
[ 3.016845] cpuidle: using governor menu
[ 3.024842] [mmc_pm]: no sdio card used in configuration
[ 3.032082] [mmc]: sunximmc_init
[ 3.039568] [mmc]: sunxi mmc controller using config : 0x1
[ 3.049971] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
[ 3.058774] [mmc]: mmc 0 power off !!
[ 3.069906] [mmc]: mmc0 Probe: base:0xf1c0f000 irq:32 dma:0 pdes:0xcfc00000, ret 0.
[ 3.080004] sunxi_leds driver init
[ 3.087191] Registered led device: red:ph10:led1
[ 3.095535] Registered led device: blue:ph20:led2
[ 3.112810] input: Logitech G500 as /devices/platform/sw-ehci.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input3
[ 3.131577] generic-usb 0003:046D:C068.0001: input: USB HID v1.11 Mouse [Logitech G500] on usb-sw-ehci-1.3/input0
[ 3.155817] input: Logitech G500 as /devices/platform/sw-ehci.1/usb1/1-1/1-1.3/1-1.3:1.1/input/input4
[ 3.174998] generic-usb 0003:046D:C068.0002: input: USB HID v1.11 Keyboard [Logitech G500] on usb-sw-ehci-1.3/input1
[ 3.190148] usbcore: registered new interface driver usbhid
[ 3.198518] usbhid: USB HID core driver
[ 3.210138] asoc: sndspdif <-> sunxi-spdif.0 mapping ok
[ 3.223655] [I2S]sunxi-i2s cannot find any using configuration for controllers, return directly!
[ 3.239842] [I2S]sndi2s cannot find any using configuration for controllers, return directly!
[ 3.251766] IPv4 over IPv4 tunneling driver
[ 3.258706] TCP: cubic registered
[ 3.265235] Initializing XFRM netlink socket
[ 3.273387] NET: Registered protocol family 10
[ 3.281925] NET: Registered protocol family 17
[ 3.289813] NET: Registered protocol family 15
[ 3.298209] Bluetooth: RFCOMM TTY layer initialized
[ 3.307256] Bluetooth: RFCOMM socket layer initialized
[ 3.315104] Bluetooth: RFCOMM ver 1.11
[ 3.323121] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.332608] Bluetooth: BNEP filters: protocol multicast
[ 3.341009] 8021q: 802.1Q VLAN Support v1.8
[ 3.349833] [mmc_pm]: No sdio card, please check your config !!
[ 3.359426] Registering the dns_resolver key type
[ 3.366074] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 3.382307] Registering SWP/SWPB emulation handler
[ 3.391650] axp20_buck2: Failed to create debugfs directory
[ 3.401060] registered taskstats version 1
[ 3.409621] I2C: i2c-1: HDMI I2C adapter
[ 3.435697] ParseEDID
[ 3.542953] EDID version: 1.4
[ 3.551755] PCLK=76300000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 60 NN
[ 3.564455] PCLK=50870000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 40 NN
[ 3.577191] disp_clk: Could not find a matching pll-freq for 50850000 pclk
[ 3.589892] disp_clk: Could not find a matching pll-freq for 76300000 pclk
[ 3.600772] EDID: No modes with good pixelclock found
[ 3.611780] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
[ 3.624402] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[ 4.057872] [mmc]: mmc 0 detect change, present 1
[ 4.356748] [mmc]: mmc 0 power on !!
[ 4.398122] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 52, RTO !!
[ 4.410871] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 52, RTO !!
[ 4.438111] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5, RTO !!
[ 4.450673] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5, RTO !!
[ 4.463238] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5, RTO !!
[ 4.475803] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5, RTO !!
[ 4.531515] mmc0: new high speed SDHC card at address 0007
[ 4.568156] mmcblk0: mmc0:0007 SD8GB 7.42 GiB
[ 4.597666] mmcblk0: p1 p2
[ 4.847142] Console: switching to colour frame buffer device 160x45
[ 4.874931] axp20_buck3: incomplete constraints, leaving on
[ 4.885284] axp20_buck2: incomplete constraints, leaving on
[ 4.895551] axp20_ldo4: incomplete constraints, leaving on
[ 4.905726] axp20_ldo3: incomplete constraints, leaving on
[ 4.915897] axp20_ldo2: incomplete constraints, leaving on
[ 4.926075] axp20_ldo1: incomplete constraints, leaving on
[ 4.939188] sunxi-rtc sunxi-rtc: setting system clock to 2017-09-18 10:10:59 UTC (1505729459)
[ 4.949721] ALSA device list:
[ 4.955734] #0: sunxi-CODEC Audio Codec
[ 4.962027] #1: sunxi-sndspdif
[ 4.967363] #2: sunxi-sndhdmi
[ 4.981239] kjournald starting. Commit interval 5 seconds
[ 4.991006] EXT3-fs (mmcblk0p2): using internal journal
[ 5.002095] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 5.013983] VFS: Mounted root (ext3 filesystem) on device 179:2.
[ 5.023901] devtmpfs: mounted
[ 5.029791] Freeing init memory: 176K
[ 5.306440] systemd[1]: systemd 206 running in system mode. (-PAM +LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP -GCRYPT +ACL +XZ)
[ 5.340792] systemd[1]: Set hostname to <meleg>.
[ 5.627981] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.642835] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.655254] systemd[1]: Expecting device dev-ttyS0.device...
[ 5.689490] systemd[1]: Expecting device dev-ttyUSB0.device...
[ 5.718164] systemd[1]: Starting Syslog Socket.
[ 5.748485] systemd[1]: Listening on Syslog Socket.
[ 5.757549] systemd[1]: Starting Remote File Systems.
[ 5.789180] systemd[1]: Reached target Remote File Systems.
[ 5.799979] systemd[1]: Expecting device dev-multi-user.device...
[ 5.829019] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.859348] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.870845] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.900573] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.910949] systemd[1]: Starting Root Slice.
[ 5.938317] systemd[1]: Created slice Root Slice.
[ 5.947444] systemd[1]: Starting User and Session Slice.
[ 5.979364] systemd[1]: Created slice User and Session Slice.
[ 5.988715] systemd[1]: Starting System Slice.
[ 6.018490] systemd[1]: Created slice System Slice.
[ 6.026429] systemd[1]: Starting Slices.
[ 6.048035] systemd[1]: Reached target Slices.
[ 6.058556] systemd[1]: Starting system-usb\x2dserial\x2dtouchscreen.slice.
[ 6.090997] systemd[1]: Created slice system-usb\x2dserial\x2dtouchscreen.slice.
[ 6.102521] systemd[1]: Starting system-getty.slice.
[ 6.129019] systemd[1]: Created slice system-getty.slice.
[ 6.139396] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 6.169873] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 6.180619] systemd[1]: Starting udev Kernel Socket.
[ 6.208932] systemd[1]: Listening on udev Kernel Socket.
[ 6.218719] systemd[1]: Starting udev Control Socket.
[ 6.248998] systemd[1]: Listening on udev Control Socket.
[ 6.258208] systemd[1]: Starting Journal Socket.
[ 6.288582] systemd[1]: Listening on Journal Socket.
[ 6.302278] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 6.344836] systemd[1]: Started Load Kernel Modules.
[ 6.354991] systemd[1]: Mounting FUSE Control File System...
[ 6.391435] systemd[1]: Mounting Configuration File System...
[ 6.452561] systemd[1]: Starting Apply Kernel Variables...
[ 6.507743] systemd[1]: Mounted Huge Pages File System.
[ 6.520972] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.532599] systemd[1]: Starting udev Coldplug all Devices...
[ 6.560766] systemd[1]: Mounting Debug File System...
[ 6.590689] systemd[1]: Starting Journal Service...
[ 6.648513] systemd[1]: Started Journal Service.
[ 6.660483] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 6.700210] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 6.715691] systemd[1]: Starting Paths.
[ 6.727947] systemd[1]: Reached target Paths.
[ 6.740478] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 6.783123] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.803982] systemd[1]: Started Set Up Additional Binary Formats.
[ 6.813023] systemd[1]: Starting Swap.
[ 6.837923] systemd[1]: Reached target Swap.
[ 6.847445] systemd[1]: Started File System Check on Root Device.
[ 6.859392] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.890790] systemd[1]: Mounting Temporary Directory...
[ 7.039476] systemd[1]: Mounted FUSE Control File System.
[ 7.086583] systemd[1]: Mounted Configuration File System.
[ 7.138877] systemd[1]: Started Apply Kernel Variables.
[ 7.218570] systemd[1]: Mounted Debug File System.
[ 7.260203] systemd[1]: Started Remount Root and Kernel File Systems.
[ 7.308811] systemd[1]: Mounted Temporary Directory.
[ 7.352713] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 7.389101] systemd[1]: Started udev Coldplug all Devices.
[ 7.403029] systemd[1]: Starting Create static device nodes in /dev...
[ 7.431192] systemd[1]: Starting Load/Save Random Seed...
[ 7.462185] systemd[1]: Started Machine ID first boot configure.
[ 7.509963] systemd[1]: Started Create static device nodes in /dev.
[ 7.538788] systemd[1]: Started Load/Save Random Seed.
[ 7.549090] systemd[1]: Starting udev Kernel Device Manager...
[ 7.581366] systemd[1]: Starting Local File Systems (Pre).
[ 7.615504] systemd-udevd[75]: starting version 206
[ 7.625738] systemd[1]: Reached target Local File Systems (Pre).
[ 7.636563] systemd[1]: Mounting /var/volatile...
[ 7.664959] systemd[1]: var-volatile.mount: Directory /var/volatile to mount over is not empty, mounting anyway.
[ 7.749333] systemd[1]: Started udev Kernel Device Manager.
[ 7.858284] systemd[1]: Mounted /var/volatile.
[ 7.867031] systemd[1]: Starting Local File Systems.
[ 7.979240] systemd[1]: Reached target Local File Systems.
[ 8.019365] systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
[ 8.135842] systemd[1]: Starting Recreate Volatile Files and Directories...
[ 8.516425] systemd[1]: Starting Sound Card.
[ 8.628592] systemd[1]: Reached target Sound Card.
[ 8.780489] systemd[1]: Started Recreate Volatile Files and Directories.
[ 8.841611] systemd[1]: Starting Update UTMP about System Reboot/Shutdown...
[ 8.962424] systemd[1]: Started Run pending postinsts.
[ 9.064382] usbcore: registered new interface driver rtl8192cu
[ 9.098626] systemd[1]: Found device /dev/ttyS0.
[ 9.251821] systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
[ 9.460576] systemd[1]: Started Update UTMP about System Reboot/Shutdown.
[ 9.510912] systemd[1]: Starting System Initialization.
[ 9.580122] systemd[1]: Reached target System Initialization.
[ 9.620825] systemd[1]: Started Manage Sound Card State (restore and store).
[ 9.683848] systemd[1]: Starting Restore Sound Card State...
[ 9.751223] systemd[1]: Starting dropbear.socket.
[ 9.858818] systemd[1]: Listening on dropbear.socket.
[ 9.870033] systemd[1]: Starting Avahi mDNS/DNS-SD Stack Activation Socket.
[ 10.001081] systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ 10.061551] systemd[1]: Starting Daily Cleanup of Temporary Directories.
[ 10.127250] systemd[1]: Started Daily Cleanup of Temporary Directories.
[ 10.192791] systemd[1]: Starting Timers.
[ 10.228094] systemd[1]: Reached target Timers.
[ 10.237835] systemd[1]: Starting D-Bus System Message Bus Socket.
[ 10.280044] systemd[1]: Listening on D-Bus System Message Bus Socket.
[ 10.297599] systemd[1]: Starting Sockets.
[ 10.328130] systemd[1]: Reached target Sockets.
[ 10.336266] systemd[1]: Starting Basic System.
[ 10.358567] systemd[1]: Reached target Basic System.
[ 10.367841] systemd[1]: Starting Connection service...
[ 10.390988] systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
[ 10.422067] systemd[1]: Starting LSB: Remove /etc/nologin at boot...
[ 10.467856] systemd[1]: Started SSH Key Generation.
[ 10.481527] systemd[1]: Starting Set CPU governor to performance...
[ 10.511181] systemd[1]: Starting Kernel Logging Service...
[ 10.578977] systemd[1]: Started Kernel Logging Service.
[ 10.599481] systemd[1]: Starting System Logging Service...
[ 10.668948] systemd[1]: Started System Logging Service.
[ 10.687523] systemd[1]: Starting Permit User Sessions...
[ 10.730155] systemd[1]: Starting Login Service...
[ 10.771108] systemd[1]: Starting D-Bus System Message Bus...
[ 10.829126] systemd[1]: Started D-Bus System Message Bus.
[ 10.853150] systemd[1]: Starting Xserver startup with a display manager...
[ 10.960325] systemd[1]: Started Xserver startup with a display manager.
[ 11.012818] systemd[1]: Starting Calaos home automation touchscreen UI...
[ 11.110213] systemd[1]: Started Calaos home automation touchscreen UI.
[ 11.189105] systemd[1]: Started Restore Sound Card State.
[ 11.260086] systemd[1]: Started LSB: Remove /etc/nologin at boot.
[ 11.309712] systemd[1]: Started Set CPU governor to performance.
[ 11.358753] systemd[1]: Started Permit User Sessions.
[ 11.382247] systemd[1]: Starting Getty on tty1...
[ 11.448168] systemd[1]: Started Getty on tty1.
[ 11.457317] systemd[1]: Starting Serial Getty on ttyS0...
[ 11.527400] systemd[1]: Started Serial Getty on ttyS0.
[ 11.548959] systemd[1]: Starting Login Prompts.
[ 11.590034] systemd[1]: Reached target Login Prompts.
[ 12.267695] Warning: this sunxi disp driver will see significant redesign.
[ 12.304059] Applications using /dev/disp directly will break.
[ 12.343118] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver
[ 12.407734] [DISP] layer allocated: 0,101
[ 12.513563] UMP<2>: Inserting UMP device driver. Compiled: Sep 11 2014, time: 17:57:08
[ 12.573413] UMP<2>: Using OS memory backend, allocation limit: 134217728
[ 12.620754] UMP: UMP device driver loaded
[ 12.673450] Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x51000000, size=33554432)
[ 12.760766] mali: use config clk_div 4
[ 12.784340] mali: clk_div 4
[ 12.800787] Mali: mali clock set completed, clock is 240000000 Hz
[ 12.859468] mali: use config clk_div 4
[ 12.879975] mali: clk_div 4
[ 12.895124] Mali: mali clock set completed, clock is 240000000 Hz
[ 12.939162] Mali: Mali device driver loaded
[ 13.021074] Mali DRM initialize, driver name: mali_drm, version 2.1
[ 13.075386] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
[ 13.107917] Mali DRM initialize, driver name: mali_drm, version 2.1
[ 13.152061] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
[ 13.622356] [cedar dev]: install start!!!
[ 13.648055] [cedar dev]: install end!!!
[ 13.653960] UMP<2>: New session opened
[ 14.571382] sunxi_emac sunxi_emac.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[ 14.637598] UMP<2>: New session opened
[ 15.306235] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[ 15.415777] ParseEDID
[ 15.539176] EDID version: 1.4
[ 15.556572] PCLK=76300000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 60 NN
[ 15.616410] PCLK=50870000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 40 NN
[ 15.670364] disp_clk: Could not find a matching pll-freq for 50850000 pclk
[ 15.676192] disp_clk: Could not find a matching pll-freq for 76300000 pclk
[ 21.848419] sunxi-rtc sunxi-rtc: actually set time to 2017-9-18 10:11:16
[ 207.889940] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[ 208.039256] ParseEDID
[ 208.163760] EDID version: 1.4
[ 208.187696] PCLK=76300000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 60 NN
[ 208.228602] PCLK=50870000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 40 NN
[ 208.268471] disp_clk: Could not find a matching pll-freq for 50850000 pclk
[ 208.281786] disp_clk: Could not find a matching pll-freq for 76300000 pclk=> La connexion de l'usb pour le coté tactile à eu lieu à partir de 207...
Et voici le lsusb -vvv :
Code:
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0608 USB-2.0 4-Port HUB
bcdDevice 77.64
iManufacturer 0
iProduct 1 USB2.0 Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x00e0
Ganged power switching
Ganged overcurrent protection
TT think time 32 FS bits
Port indicators
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0103 power enable connect
Port 4: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 003 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bda Realtek Semiconductor Corp.
idProduct 0x8176 RTL8188CUS 802.11n WLAN Adapter
bcdDevice 2.00
iManufacturer 1 Realtek
iProduct 2 802.11n WLAN Adapter
iSerial 3 00e04c000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.04
iManufacturer 3 Linux 3.4.79 ehci_hcd
iProduct 2 SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
iSerial 1 sw-ehci
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 1
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Device Status: 0x0001
Self Powered
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.04
iManufacturer 3 Linux 3.4.79 ohci_hcd
iProduct 2 SW USB2.0 'Open' Host Controller (OHCI) Driver
iSerial 1 sw-ohci
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 1
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.04
iManufacturer 3 Linux 3.4.79 ehci_hcd
iProduct 2 SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
iSerial 1 sw-ehci
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 1
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Device Status: 0x0001
Self Powered
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.04
iManufacturer 3 Linux 3.4.79 ohci_hcd
iProduct 2 SW USB2.0 'Open' Host Controller (OHCI) Driver
iSerial 1 sw-ohci
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 1
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 001 Device 003: ID 046d:c068 Logitech, Inc. G500 Laser Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc068 G500 Laser Mouse
bcdDevice 58.02
iManufacturer 1 Logitech
iProduct 2 G500
iSerial 3 C54E30C03F0018
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4 U58.02_B0018
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 67
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 122
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0014 1x 20 bytes
bInterval 1
Device Status: 0x0000
(Bus Powered)Si tu as besoin d'autre chose, n'hésite pas.