Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
en:getstarted [2014/05/21 14:00]
naguirre created
en:getstarted [2016/01/13 20:28] (current)
Line 1: Line 1:
-====== Calaos Get started ======+====== Calaos quick start guide ====== 
 + 
 +====== Raspberry pi quick start guide ====== 
 +===== What you will need ===== 
 +* A computer with Linux, MacosX or Windows 
 +* A Raspberry pi, Model B 
 +* An SD Card, We recommend an 2GB class 4 SD card 
 +* Download the latest official calaos image for raspberrypi :[[ http://calaos.fr/download/experimental/calaos-image-raspberrypi-2014-04-28.tar.xz]] 
 + 
 +==== Creating the SD card with **calaos os** ==== 
 +=== Linux === 
 +Launch a terminal and go in the directory where you download the calaos os image. 
 +'' 
 +$ cd ~/Downloads 
 +$ tar xvf calaos-image-raspberrypi-2014-04-28.tar.xz 
 +'' 
 +Insert the sdcard into the sdcard reader of your PC. 
 +You need to know what's the device created by linux when the card is inserted. The device name is something like /dev/sdX or /dev/mmcblkX. 
 +To know the exact name use the following command : 
 +'' 
 +$ dmesg | tail 
 +'' 
 + 
 +You should get something like that : 
 +'' 
 +[191385.790344] mmc0: new high speed SDHC card at address 1234 
 +[191385.790574] mmcblk0: mmc0:1234 SA04G 3.67 GiB 
 +[191385.791564]  mmcblk0: p1 p2 
 +'' 
 +In that case the device is /dev/mmvblk0 
 + 
 +We need to ensure that this device is not mounted on your system 
 +'' 
 +$ sudo unmount /dev/mmvblk0p1 
 +$ sudo unmount /dev/mmvblk0p2 
 +... 
 +'' 
 +or in case your device is detected as /dev/sdX 
 +'' 
 +$ sudo unmount /dev/sdd1 
 +$ sudo unmount /dev/sdd2 
 +... 
 +'' 
 +You can verify that the devices are not mounted by using the mount command  
 +'' 
 +$ mount 
 +'' 
 +No sdcard must appears in the resulting list. 
 + 
 +Let's now copy the **calaos os** on the sdcard 
 +'' 
 +sudo dd if=calaos-image-raspberrypi-2014-04-28.sdimg of=/dev/mmcblk0 
 +'' 
 +Once the operation is terminated, you can remove the sdcard, and insert it in the Raspberry pi. 
 + 
 + 
 +=== Macos === 
 +TBC 
 +=== Windows === 
 +TBC 
 + 
 + 
 +