Differences

This shows you the differences between two versions of the page.

--- avreceivers:yamaha [2014/06/22 16:25]
azerty [Liste des commandes dans calaos installer]
+++ avreceivers:yamaha [2016/01/13 20:28]
@@ Line 1: / Line 1: @@
-====== Amplificateur Yamaha ======
-===== Liste des commandes dans calaos installer =====
-Fonctionne avec la serie rx
-  * Volume X
-  * Power on
-  * Power off
-  * **source X**
-<code>
-source 1 -> HDMI 1
-source 2 -> HDMI 2
-source 3 -> HDMI 3
-source 4 -> HDMI 4
-source 5 -> HDMI 5
-source 6 -> Tuner
-source 7 -> Phono
-source 8-> Video 1
-source 9 -> Video 2
-source 10 -> Video 3
-source 11 -> Video 4
-source 12 -> Video 5
-source 13 -> Video 6
-source 14 -> V-Aux
-source 15 -> Audio 1
-source 16 -> Audio 2
-source 17 -> Dock
-source 18 -> iPod
-source 19 -> Bluetooth
-source 20 -> Network
-source 21 -> Napster
-source 22 -> Net Radio
-source 23 -> USB
-source 24-> iPod (USB)
-source 25 -> PC
-source 26 -> UAW
-</code>
-  * **custom cmd**
-exemple
-<code>
-custom @MAIN:INP=HDMI1
-</code>
-@MAIN @ZONE2 @ZONE3
-<code>
-Command Details of SubUnit: MAIN
-PWR
-[PUT Command]
-@MAIN:PWR=
-[Parameters]
-Standby :turining its state to Standby / GET: indicating Standby status.
-On :turining its state to On / GET: indicating On status.
-On/Standby :toggling its status between On/Standby
-SLEEP
-[PUT Command]
-@MAIN:SLEEP=
-[Parameters]
-Off :turining its setting state to Off / GET: indicating Off setting status.
-min :setting to 30 min / GET: indicating it's setting is 30 min.
-min :setting to 60 min / GET: indicating it's setting is 60 min.
-min :setting to 90 min / GET: indicating it's setting is 90 min.
-min :setting to 120 min / GET: indicating it's setting is 120 min.
-Last :setting to the value set last
-VOL
-[PUT Command]
-@MAIN:VOL=
-[Parameters]
-Down :decrementing by 1 step (0.5dB)
-Up :incrementing by 1 step (0.5dB)
-Down 1 dB :decrementing by 1 dB
-Up 1 dB :incrementing by 1 dB
-Down 2 dB :decrementing by 2 dB
-Up 2 dB :incrementing by 2 dB
-Down 5 dB :decrementing by 5 dB
-Up 5 dB :incrementing by 5 dB
-Numerical Number: -80.5 to 16.5, Step: 0.5 :setting to the specified value.
--80.5 means muting. First decimal place must be always included. Ex: 10.0, -25.0 or 0.0 etc. The unit for this parameter is "dB".
-MUTE
-[PUT Command]
-@MAIN:MUTE=
-[Parameters]
-Off :turining its state to Off / GET: indicating Off status.
-Att -40 dB :attenuating by 40 dB from current volume status. / GET: indicating attenuated by 40 dB from current
-volume status.
-Att -20 dB :attenuating by 20 dB from current volume status. / GET: indicating attenuated by 20 dB from current
-volume status.
-On :turining its state to On / GET: indicating On status.
-On/Off :toggling its status between On/Off
-MAXVOL
-[PUT Command]
-@MAIN:MAXVOL=
-[Parameters]
-Numerical Number: -30.0 to 15.0, Step: 5.0 :setting to the specified value. / GET: indicating the current setting value.
-First decimal place must be always included. Ex: 10.0, -25.0 or 0.0 etc.
-The unit for this parameter is "dB".
-.5: setting to the specified value. / GET: indicating the current setting value.
-Meaning no limit of maximum volume
-The unit for this parameter is "dB".
-INITVOLMODE
-[PUT Command]
-@MAIN:INITVOLMODE=
-[Parameters]
-Offturining its setting state to Off / GET: indicating Off setting status.
-On :turining its setting state to On / GET: indicating On setting status.
-INITVOLLVL
-[PUT Command]
-@MAIN:INITVOLLVL=
-[Parameters]
-Mute :turining its setting state to Mute / GET: indicating Mute setting status.
-Initially muted when turned on
-Numerical Number: -80.0 to 16.5, Step: 0.5
-setting to the specified value. / GET: indicating the current setting value.
-First decimal place must be always included. Ex: 10.0, -25.0 or 0.0 etc.
-The unit for this parameter is "dB".
-INP
-[PUT Command]
-@MAIN:INP=
-[Parameters]
-SIRIUS :selecting input SIRIUS
-TUNER :selecting input TUNER
-HDMI1 :selecting input HDMI1
-HDMI2 :selecting input HDMI2
-HDMI3 :selecting input HDMI3
-HDMI4 :selecting input HDMI4
-HDMI5 :selecting input HDMI5
-AV1 :selecting input AV1
-AV2 :selecting input AV2
-AV3 :selecting input AV3
-AV4 :selecting input AV4
-AV5 :selecting input AV5
-AV6 :selecting input AV6
-V-AUX :selecting input V-AUX
-AUDIO1 :selecting input AUDIO1
-AUDIO2 :selecting input AUDIO2
-DOCK :selecting input DOCK
-iPod :selecting input iPod
-Bluetooth :selecting input Bluetooth
-UAW :selecting input UAW
-NET :selecting input NET
-Rhapsody :selecting input Rhapsody
-SIRIUS InternetRadio :selecting input SIRIUS InternetRadio
-Pandora :selecting input Pandora
-Napster :selecting input Napster
-PC :selecting input PC
-NET RADIO :selecting input NET RADIO
-USB :selecting input USB
-iPod (USB) :selecting input iPod (USB)
-DECODERSEL
-[PUT Command]
-@MAIN:DECODERSEL=
-[Parameters]
-Auto :turining its setting state to Auto
-Automatically selects audio decoder. Default value.
-DTS :turining its setting state to DTS
-Audio decoder is fixed to DTS
-SCENE
-[PUT Command]
-@MAIN:SCENE=
-[Parameters]
-Scene 1
-selecting Scene 1
-Scene 2
-selecting Scene 2
-Scene 3
-selecting Scene 3
-Scene 4
-selecting Scene 4
-SPBASS
-[PUT Command]
-@MAIN:SPBASS=
-[Parameters]
-Numerical Number: -6.0 to 6.0, Step: 0.5
-setting to the specified value. / GET: indicating the current setting value.
-First decimal place must be always included. Ex: 3.0, -4.0
-The unit for this parameter is "dB".
-SPTREBLE
-[PUT Command]
-@MAIN:SPTREBLE=
-[Parameters]
-Parameters are the same as
-SPBASS
-PUREDIRMODE
-[PUT Command]
-@MAIN:PUREDIRMODE=
-[Parameters]
-Off :turining its setting state to Off
-On :turining its setting state to On
-ADAPTIVEDRC
-[PUT Command]
-@MAIN:ADAPTIVEDRC=
-[Parameters]
-Off :turining its setting state to Off
-Auto :turining its setting state to Auto
-LIPSYNCMODE
-[PUT Command]
-@MAIN:LIPSYNCMODE=
-[Parameters]
-Manual :turining its setting state to Manual / GET: indicating Manual setting status.
-About "Manual" setting of Lipsync Mode: When selecting "Manual" here, the audio delay value can be
-manually set. The effective setting of the audio delay value has some dependencies as follows. In case of
-using Analog Video Output only (no HDMI connection is active), audio delay value set by "@MAIN:ANLGOUT"
-command is effective. In case that HDMI OUT1 is in active connection, the value set by
-"@MAIN:HDMIOUT1MANUAL" command works. Else if HDMI OUT2 is the only one activated, the setting by
-"@MAIN:HDMIOUT2MANUAL" is enabled.
-Auto :turining its setting state to Auto / GET: indicating Auto setting status.
-About Lipsync Mode "Auto": Basically, Audio Delay value has 5 different settings internally according to "Video
-Output State (5 Status available)". And the 5 different status of "Video Output State" is determined by the
-combination of two states of "Display's state of compatibility/incompatibility with Auto Lipsync feature" and
-"Current effective HDMI output state (on the receiver)", which means 4 status, plus a status of "Analog Video
-Out only in use", summing up to 5 in total. The "Auto" setting of Lipsync Mode is to dynamically change the
-Audio Delay value corresponding to a specific status of Video Output State. "Video Output State" can be
-retrieved with a command of "@MAIN:SELINFO", and you can set the effective Audio Delay value according to
-respective Video Output status by these commands as following;
-When "@MAIN:SELINFO=Analog": the audio delay can be set by "@MAIN:ANLGOUT" command
-When "@MAIN:SELINFO=HDMI1 Auto" (meaning TV compatible with Auto Lipsync and HDMI OUT1 is
-effective): the audio delay can be set by "@MAIN:HDMIOUT1OFFSET" command
-When "@MAIN:SELINFO=HDMI1 Manual" (meaning TV incompatible with Auto Lipsync and HDMI OUT1 is
-effective): the audio delay can be set by "@MAIN:HDMIOUT1MANUAL" command
-When "@MAIN:SELINFO=HDMI2 Auto" (meaning TV compatible with Auto Lipsync and HDMI OUT 2 is the
-only one in effective): the audio delay can be set by "@MAIN:HDMIOUT2OFFSET" command
-When "@MAIN:SELINFO=HDMI2 Manual" (meaning TV incompatible with Auto Lipsync and HDMI OUT 2 is
-the only one in effective): the audio delay can be set by "@MAIN:HDMIOU21MANUAL" command
-LIPSYNCANLGOUT
-[PUT Command]
-@MAIN:LIPSYNCANLGOUT=
-[Parameters]
-Down
-incrementing by 1 step (1 millisecond)
-Up
-decrementing by 1 step (1 millisecond)
-Numerical Number: 0 to 250, Step: 1
-setting to the specified value.
-The unit for this parameter is "ms".
-LIPSYNCHDMIOUT1OFFSET
-[PUT Command]
-@MAIN:LIPSYNCHDMIOUT1OFFSET=
-[Parameters]
-Down
-incrementing by 1 step (1 millisecond)
-Up
-decrementing by 1 step (1 millisecond)
-Numerical Number: -250 to 250, Step: 1
-setting to the specified value.
-The unit for this parameter is "ms".
-LIPSYNCHDMIOUT1MANUAL
-[PUT Command]
-@MAIN:LIPSYNCHDMIOUT1MANUAL=
-[Parameters]
-Down
-incrementing by 1 step (1 millisecond)
-Up
-decrementing by 1 step (1 millisecond)
-Numerical Number: 0 to 250, Step: 1
-setting to the specified value.
-The unit for this parameter is "ms".
-LIPSYNCHDMIOUT2OFFSET
-[PUT Command]
-@MAIN:LIPSYNCHDMIOUT2OFFSET=
-[Parameters]
-Parameters are the same as
-LIPSYNCHDMIOUT1OFFSET
-LIPSYNCHDMIOUT2MANUAL
-[PUT Command]
-@MAIN:LIPSYNCHDMIOUT2MANUAL=
-[Parameters]
-Parameters are the same as
-LIPSYNCHDMIOUT1MANUAL
-HDMIOUT
-[PUT Command]
-@MAIN:HDMIOUT=
-[Parameters]
-Off :turining its setting state to Off (output is disabled)/ GET: indicating Off setting status.
-OUT :turining its setting state to OUT (meaning output is enabled) / GET: indicating OUT setting status.
-Initial Auto Feedback is Available
-[Parameters]
-Hall in Munich :turining its setting state to Hall in Munich / GET: indicating Hall in Munich setting status.
-Hall in Vienna :turining its setting state to Hall in Vienna / GET: indicating Hall in Vienna setting status.
-Chamber :turining its setting state to Chamber / GET: indicating Chamber setting status.
-Cellar Club :turining its setting state to Cellar Club / GET: indicating Cellar Club setting status.
-The Roxy Theatre :turining its setting state to The Roxy Theatre / GET: indicating The Roxy Theatre setting status.
-The Bottom Line :turining its setting state to The Bottom Line / GET: indicating The Bottom Line setting status.
-Sports :turining its setting state to Sports / GET: indicating Sports setting status.
-Action Game :turining its setting state to Action Game / GET: indicating Action Game setting status.
-Roleplaying Game :turining its setting state to Roleplaying Game / GET: indicating Roleplaying Game setting status.
-Music Video :turining its setting state to Music Video / GET: indicating Music Video setting status.
-Standard :turining its setting state to Standard / GET: indicating Standard setting status.
-Spectacle :turining its setting state to Spectacle / GET: indicating Spectacle setting status.
-Sci-Fi :turining its setting state to Sci-Fi / GET: indicating Sci-Fi setting status.
-Adventure :turining its setting state to Adventure / GET: indicating Adventure setting status.
-Drama :turining its setting state to Drama / GET: indicating Drama setting status.
-Mono Movie :turining its setting state to Mono Movie / GET: indicating Mono Movie setting status.
-ch Stereo :turining its setting state to 2ch Stereo / GET: indicating 2ch Stereo setting status.
-ch Stereo :turining its setting state to 7ch Stereo / GET: indicating 7ch Stereo setting status.
-Surround Decoder :turining its setting state to Surround Decoder / GET: indicating Surround Decoder setting status.
-ADAPTIVEDSP
-[PUT Command]
-@MAIN:ADAPTIVEDSP=
-[Parameters]
-Off :turining its setting state to Off / GET: indicating Off setting status.
-Auto :turining its setting state to Auto / GET: indicating Auto setting status.
-DCINEMA
-[PUT Command]
-@MAIN:3DCINEMA=
-Parameter
-@MAIN:3DCINEMA=?
-Operating & retrieving 3D DSP setting state
-[Parameters]
-Off :turining its setting state to Off / GET: indicating Off setting status.
-Auto :turining its setting state to Auto / GET: indicating Auto setting status.
-EXSURDECODER
-[PUT Command]
-@MAIN:EXSURDECODER=
-Parameter
-@MAIN:EXSURDECODER=?
-Operating & retrieving Extended Surround setting state
-[Parameters]
-Off :turining its setting state to Off / GET: indicating Off setting status.
-Auto :turining its setting state to Auto / GET: indicating Auto setting status.
-Dolby PLIIx Movie :turining its setting state to Dolby PLIIx Movie / GET: indicating Dolby PLIIx Movie setting status.
-Dolby PLIIx Music :turining its setting state to Dolby PLIIx Music / GET: indicating Dolby PLIIx Music setting status.
-EX/ES :turining its setting state to EX/ES / GET: indicating EX/ES setting status.
-CHDECODER
-[PUT Command]
-@MAIN:2CHDECODER=
-[Parameters]
-Dolby PL
-Dolby PLII Movie :turining its setting state to Dolby PLII Movie / GET: indicating Dolby PLII Movie setting status.
-Dolby PLII Music :turining its setting state to Dolby PLII Music / GET: indicating Dolby PLII Music setting status.
-Dolby PLII Game :turining its setting state to Dolby PLII Game / GET: indicating Dolby PLII Game setting status.
-Dolby PLIIx Movie :turining its setting state to Dolby PLIIx Movie / GET: indicating Dolby PLIIx Movie setting status.
-Dolby PLIIx Music :turining its setting state to Dolby PLIIx Music / GET: indicating Dolby PLIIx Music setting status.
-Dolby PLIIx Game :turining its setting state to Dolby PLIIx Game / GET: indicating Dolby PLIIx Game setting status.
-DTS NEO:6 Cinema :turining its setting state to DTS NEO:6 Cinema / GET: indicating DTS NEO:6 Cinema setting status.
-DTS NEO:6 Music :turining its setting state to DTS NEO:6 Music / GET: indicating DTS NEO:6 Music setting status.
-PLAYBACK
-[PUT Command]
-@MAIN:PLAYBACK=
-[Parameters]
-Stop : change its state to Stop
-Pause
-</code>