Fonctionne avec la serie rx
BD -> source 4 DVD -> source 5 TVSAT -> source 6 DVRBDR -> source 7 VIDEO 1 -> source 8 VIDEO 2 -> source 9 VIDEO 3 -> source 10 VIDEO 4 -> source 11 VIDEO 5 -> source 12 VIDEO 6 -> source 13 VIDEO 7 -> source 14 VIDEO 8 -> source 15 NETRADIO -> source 16 IPOD -> source 17 HDMI 1 -> source 18 HDMI 2 -> source 19 HDMI 3 -> source 20 HDMI 4 -> source 21 HDMI 5 -> source 22 HDMI 6 -> source 23 HDMI 7 -> source 24 HDMI 8 -> source 25 CD -> source 26 CDRTAPE -> source 27 TUNER -> source 28 PHONO -> source 29 MULTIIN -> source 30 APORT -> source 31 SIRIUS -> source 32 TV -> source 33 SAT -> source 34 GAME 1 -> source 35 GAME 2 -> source 36 AUX -> source 37 DOCK -> source 38 HDRADIO -> source 39 RHAPSODY -> source 40 NAPSTER -> source 41 PANDORA -> source 42 LASTFM -> source 43 FLICKR -> source 44 FAV -> source 45 SERVER -> source 46 NETWORK -> source 47 USB -> source 48 USB2 -> source 49 USB3 -> source 50 USB4 -> source 51 USB5 -> source 52 USB6 -> source 53 USB7 -> source 54 USB8 -> source 55 VCR -> source 56 AUX1 -> source 57 AUX2 -> source 58 AUX3 -> source 59 AUX4 -> source 60 AUX5 -> source 61 AUX6 -> source 62 AUX7 -> source 63 AUX8 -> source 64 BLUETOOTH -> source 65 IPODUSB -> source 66 PC -> source 67 UAW -> source 68
exemple
custom @MAIN:INP=HDMI1
@MAIN @ZONE2 @ZONE3
Command Details of SubUnit: MAIN PWR [PUT Command] @MAIN:PWR= [Parameters] Standby :turining its state to Standby On :turining its state to On On/Standby :toggling its status between On/Standby SLEEP [PUT Command] @MAIN:SLEEP= [Parameters] Off :turining its setting state to Off 30 min :setting to 30 min 60 min :setting to 60 min 90 min :setting to 90 min 120 min :setting to 120 min Last :setting to the value set last VOL [PUT Command] @MAIN:VOL= [Parameters] Down :decrementing by 1 step (0.5dB) Up :incrementing by 1 step (0.5dB) Down 1 dB :decrementing by 1 dB Up 1 dB :incrementing by 1 dB Down 2 dB :decrementing by 2 dB Up 2 dB :incrementing by 2 dB Down 5 dB :decrementing by 5 dB Up 5 dB :incrementing by 5 dB Numerical Number: -80.5 to 16.5, Step: 0.5 :setting to the specified value. -80.5 means muting. First decimal place must be always included. Ex: 10.0, -25.0 or 0.0 etc. The unit for this parameter is "dB". MUTE [PUT Command] @MAIN:MUTE= [Parameters] Off :turining its state to Off Att -40 dB :attenuating by 40 dB from current volume status. volume status. Att -20 dB :attenuating by 20 dB from current volume status. volume status. On :turining its state to On On/Off :toggling its status between On/Off MAXVOL [PUT Command] @MAIN:MAXVOL= [Parameters] Numerical Number: -30.0 to 15.0, Step: 5.0 :setting to the specified value. First decimal place must be always included. Ex: 10.0, -25.0 or 0.0 etc. The unit for this parameter is "dB". 16.5: setting to the specified value. Meaning no limit of maximum volume The unit for this parameter is "dB". INITVOLMODE [PUT Command] @MAIN:INITVOLMODE= [Parameters] Offturining its setting state to Off On :turining its setting state to On INITVOLLVL [PUT Command] @MAIN:INITVOLLVL= [Parameters] Mute :turining its setting state to Mute Initially muted when turned on Numerical Number: -80.0 to 16.5, Step: 0.5 setting to the specified value. First decimal place must be always included. Ex: 10.0, -25.0 or 0.0 etc. The unit for this parameter is "dB". INP [PUT Command] @MAIN:INP= [Parameters] SIRIUS :selecting input SIRIUS TUNER :selecting input TUNER HDMI1 :selecting input HDMI1 HDMI2 :selecting input HDMI2 HDMI3 :selecting input HDMI3 HDMI4 :selecting input HDMI4 HDMI5 :selecting input HDMI5 AV1 :selecting input AV1 AV2 :selecting input AV2 AV3 :selecting input AV3 AV4 :selecting input AV4 AV5 :selecting input AV5 AV6 :selecting input AV6 V-AUX :selecting input V-AUX AUDIO1 :selecting input AUDIO1 AUDIO2 :selecting input AUDIO2 DOCK :selecting input DOCK iPod :selecting input iPod Bluetooth :selecting input Bluetooth UAW :selecting input UAW NET :selecting input NET Rhapsody :selecting input Rhapsody SIRIUS InternetRadio :selecting input SIRIUS InternetRadio Pandora :selecting input Pandora Napster :selecting input Napster PC :selecting input PC NET RADIO :selecting input NET RADIO USB :selecting input USB iPod (USB) :selecting input iPod (USB) DECODERSEL [PUT Command] @MAIN:DECODERSEL= [Parameters] Auto :turining its setting state to Auto Automatically selects audio decoder. Default value. DTS :turining its setting state to DTS Audio decoder is fixed to DTS SCENE [PUT Command] @MAIN:SCENE= [Parameters] Scene 1 selecting Scene 1 Scene 2 selecting Scene 2 Scene 3 selecting Scene 3 Scene 4 selecting Scene 4 SPBASS [PUT Command] @MAIN:SPBASS= [Parameters] Numerical Number: -6.0 to 6.0, Step: 0.5 setting to the specified value. First decimal place must be always included. Ex: 3.0, -4.0 The unit for this parameter is "dB". SPTREBLE [PUT Command] @MAIN:SPTREBLE= [Parameters] Parameters are the same as SPBASS PUREDIRMODE [PUT Command] @MAIN:PUREDIRMODE= [Parameters] Off :turining its setting state to Off On :turining its setting state to On ADAPTIVEDRC [PUT Command] @MAIN:ADAPTIVEDRC= [Parameters] Off :turining its setting state to Off Auto :turining its setting state to Auto LIPSYNCMODE [PUT Command] @MAIN:LIPSYNCMODE= [Parameters] Manual :turining its setting state to Manual About "Manual" setting of Lipsync Mode: When selecting "Manual" here, the audio delay value can be manually set. The effective setting of the audio delay value has some dependencies as follows. In case of using Analog Video Output only (no HDMI connection is active), audio delay value set by "@MAIN:ANLGOUT" command is effective. In case that HDMI OUT1 is in active connection, the value set by "@MAIN:HDMIOUT1MANUAL" command works. Else if HDMI OUT2 is the only one activated, the setting by "@MAIN:HDMIOUT2MANUAL" is enabled. Auto :turining its setting state to Auto About Lipsync Mode "Auto": Basically, Audio Delay value has 5 different settings internally according to "Video Output State (5 Status available)". And the 5 different status of "Video Output State" is determined by the combination of two states of "Display's state of compatibility/incompatibility with Auto Lipsync feature" and "Current effective HDMI output state (on the receiver)", which means 4 status, plus a status of "Analog Video Out only in use", summing up to 5 in total. The "Auto" setting of Lipsync Mode is to dynamically change the Audio Delay value corresponding to a specific status of Video Output State. "Video Output State" can be retrieved with a command of "@MAIN:SELINFO", and you can set the effective Audio Delay value according to respective Video Output status by these commands as following; When "@MAIN:SELINFO=Analog": the audio delay can be set by "@MAIN:ANLGOUT" command When "@MAIN:SELINFO=HDMI1 Auto" (meaning TV compatible with Auto Lipsync and HDMI OUT1 is effective): the audio delay can be set by "@MAIN:HDMIOUT1OFFSET" command When "@MAIN:SELINFO=HDMI1 Manual" (meaning TV incompatible with Auto Lipsync and HDMI OUT1 is effective): the audio delay can be set by "@MAIN:HDMIOUT1MANUAL" command When "@MAIN:SELINFO=HDMI2 Auto" (meaning TV compatible with Auto Lipsync and HDMI OUT 2 is the only one in effective): the audio delay can be set by "@MAIN:HDMIOUT2OFFSET" command When "@MAIN:SELINFO=HDMI2 Manual" (meaning TV incompatible with Auto Lipsync and HDMI OUT 2 is the only one in effective): the audio delay can be set by "@MAIN:HDMIOU21MANUAL" command LIPSYNCANLGOUT [PUT Command] @MAIN:LIPSYNCANLGOUT= [Parameters] Down incrementing by 1 step (1 millisecond) Up decrementing by 1 step (1 millisecond) Numerical Number: 0 to 250, Step: 1 setting to the specified value. The unit for this parameter is "ms". LIPSYNCHDMIOUT1OFFSET [PUT Command] @MAIN:LIPSYNCHDMIOUT1OFFSET= [Parameters] Down incrementing by 1 step (1 millisecond) Up decrementing by 1 step (1 millisecond) Numerical Number: -250 to 250, Step: 1 setting to the specified value. The unit for this parameter is "ms". LIPSYNCHDMIOUT1MANUAL [PUT Command] @MAIN:LIPSYNCHDMIOUT1MANUAL= [Parameters] Down incrementing by 1 step (1 millisecond) Up decrementing by 1 step (1 millisecond) Numerical Number: 0 to 250, Step: 1 setting to the specified value. The unit for this parameter is "ms". LIPSYNCHDMIOUT2OFFSET [PUT Command] @MAIN:LIPSYNCHDMIOUT2OFFSET= [Parameters] Parameters are the same as LIPSYNCHDMIOUT1OFFSET LIPSYNCHDMIOUT2MANUAL [PUT Command] @MAIN:LIPSYNCHDMIOUT2MANUAL= [Parameters] Parameters are the same as LIPSYNCHDMIOUT1MANUAL HDMIOUT [PUT Command] @MAIN:HDMIOUT= [Parameters] Off :turining its setting state to Off (output is disabled) OUT :turining its setting state to OUT (meaning output is enabled) Initial Auto Feedback is Available [Parameters] Hall in Munich :turining its setting state to Hall in Munich Hall in Vienna :turining its setting state to Hall in Vienna Chamber :turining its setting state to Chamber Cellar Club :turining its setting state to Cellar Club The Roxy Theatre :turining its setting state to The Roxy Theatre The Bottom Line :turining its setting state to The Bottom Line Sports :turining its setting state to Sports Action Game :turining its setting state to Action Game Roleplaying Game :turining its setting state to Roleplaying Game Music Video :turining its setting state to Music Video Standard :turining its setting state to Standard Spectacle :turining its setting state to Spectacle Sci-Fi :turining its setting state to Sci-Fi Adventure :turining its setting state to Adventure Drama :turining its setting state to Drama Mono Movie :turining its setting state to Mono Movie 2ch Stereo :turining its setting state to 2ch Stereo 7ch Stereo :turining its setting state to 7ch Stereo Surround Decoder :turining its setting state to Surround Decoder ADAPTIVEDSP [PUT Command] @MAIN:ADAPTIVEDSP= [Parameters] Off :turining its setting state to Off Auto :turining its setting state to Auto 3DCINEMA [PUT Command] @MAIN:3DCINEMA= Parameter @MAIN:3DCINEMA=? Operating & retrieving 3D DSP setting state [Parameters] Off :turining its setting state to Off Auto :turining its setting state to Auto EXSURDECODER [PUT Command] @MAIN:EXSURDECODER= Parameter @MAIN:EXSURDECODER=? Operating & retrieving Extended Surround setting state [Parameters] Off :turining its setting state to Off Auto :turining its setting state to Auto Dolby PLIIx Movie :turining its setting state to Dolby PLIIx Movie Dolby PLIIx Music :turining its setting state to Dolby PLIIx Music EX/ES :turining its setting state to EX/ES 2CHDECODER [PUT Command] @MAIN:2CHDECODER= [Parameters] Dolby PL Dolby PLII Movie :turining its setting state to Dolby PLII Movie Dolby PLII Music :turining its setting state to Dolby PLII Music Dolby PLII Game :turining its setting state to Dolby PLII Game Dolby PLIIx Movie :turining its setting state to Dolby PLIIx Movie Dolby PLIIx Music :turining its setting state to Dolby PLIIx Music Dolby PLIIx Game :turining its setting state to Dolby PLIIx Game DTS NEO:6 Cinema :turining its setting state to DTS NEO:6 Cinema DTS NEO:6 Music :turining its setting state to DTS NEO:6 Music PLAYBACK [PUT Command] @MAIN:PLAYBACK= [Parameters] Stop : change its state to Stop Pause