Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ecran 10p
#43
Je ne sais plus vraiment ce dont tu as besoin pour faire avancer le truc ...

Alors dans le doute voici le contenu de mon dmesg après un démarrage :


Code:
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 3.4.79 (ubuntu@calaos-os) (gcc version 4.8.1 (GCC) ) #1 PREEMPT Thu Sep 11 17:56:59 UTC 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: sun4i
[    0.000000] Memory Reserved:
[    0.000000]  SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
[    0.000000]  G2D  : 0x50000000 - 0x50ffffff  (  16 MB)
[    0.000000]  LCD  : 0x51000000 - 0x52ffffff  (  32 MB)
[    0.000000] cma: CMA: reserved 192 MiB at 43c00000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] sunxi: Allwinner A10 revision C (AW1623/sun4i) detected.
[    0.000000] On node 0 totalpages: 262144
[    0.000000] free_area_init_node: node 0, pgdat c088bf98, node_mem_map d3000000
[    0.000000]   DMA zone: 512 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 65024 pages, LIFO batch:15
[    0.000000]   Normal zone: 1008 pages used for memmap
[    0.000000]   Normal zone: 128016 pages, LIFO batch:31
[    0.000000]   HighMem zone: 528 pages used for memmap
[    0.000000]   HighMem zone: 67056 pages, LIFO batch:15
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1024MB = 1024MB total
[    0.000000] Memory: 783784k/783784k available, 264792k reserved, 270336K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07f7030   (8125 kB)
[    0.000000]       .init : 0xc07f8000 - 0xc0824000   ( 176 kB)
[    0.000000]       .data : 0xc0824000 - 0xc0897320   ( 461 kB)
[    0.000000]        .bss : 0xc0897344 - 0xc0952b08   ( 750 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:128
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] Console: colour dummy device 80x30
[    0.006004] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
[    0.050262] pid_max: default: 32768 minimum: 301
[    0.053870] Mount-cache hash table entries: 512
[    0.057744] Initializing cgroup subsys cpuacct
[    0.061147] Initializing cgroup subsys devices
[    0.064543] Initializing cgroup subsys freezer
[    0.067787] Initializing cgroup subsys blkio
[    0.071340] CPU: Testing write buffer coherency: ok
[    0.078889] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    0.084436] Setting up static identity map for 0x4058a760 - 0x4058a7b8
[    0.087328] devtmpfs: initialized
[    0.089550] dummy:
[    0.102728] NET: Registered protocol family 16
[    0.110531] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.115840] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.119348] Init eGon pin module V2.0
[    0.124767] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
[    0.126872] Initialize DMAC OK
[    0.134064] bio: create slab <bio-0> at 0
[    0.137445] sunxi_gpio driver init ver 1.3
[    0.142989] gpiochip_add: registered GPIOs 1 to 4 on device: A1X_GPIO
[    0.146005] SCSI subsystem initialized
[    0.148984] libata version 3.00 loaded.
[    0.153575] usbcore: registered new interface driver usbfs
[    0.157883] usbcore: registered new interface driver hub
[    0.162011] usbcore: registered new device driver usb
[    0.165657] Linux video capture interface: v2.00
[    0.171193] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.174067] Bluetooth: Core ver 2.16
[    0.177521] NET: Registered protocol family 31
[    0.182824] Bluetooth: HCI device and connection manager initialized
[    0.186656] Bluetooth: HCI socket layer initialized
[    0.190673] Bluetooth: L2CAP socket layer initialized
[    0.194513] Bluetooth: SCO socket layer initialized
[    0.199989] cfg80211: Calling CRDA to update world regulatory domain
[    0.204418] Switching to clocksource aw_64bits_counter
[    0.206450] FS-Cache: Loaded
[    0.208563] CacheFiles: Loaded
[    0.217886] NET: Registered protocol family 2
[    0.224154] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.230995] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.238210] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[    0.244278] TCP: Hash tables configured (established 131072 bind 65536)
[    0.246463] TCP: reno registered
[    0.251268] UDP hash table entries: 512 (order: 1, 8192 bytes)
[    0.256503] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[    0.260003] NET: Registered protocol family 1
[    0.265137] RPC: Registered named UNIX socket transport module.
[    0.268851] RPC: Registered udp transport module.
[    0.272507] RPC: Registered tcp transport module.
[    0.277895] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.282953] audit: initializing netlink socket (disabled)
[    0.286646] type=2000 audit(0.279:1): initialized
[    0.290711] highmem bounce pool size: 64 pages
[    0.299600] VFS: Disk quotas dquot_6.5.2
[    0.304972] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.310635] NFS: Registering the id_resolver key type
[    0.314830] NTFS driver 2.1.30 [Flags: R/W].
[    0.318165] fuse init (API version 7.18)
[    0.321542] msgmni has been set to 1386
[    0.331587] alg: comp: Compression test 1 failed for lzo-generic: output len = 57
[    0.334732] alg: No test for stdrng (krng)
[    0.341388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.344272] io scheduler noop registered
[    0.347494] io scheduler deadline registered
[    0.351254] io scheduler cfq registered (default)
[    0.355890] sunxi disp driver loaded (/dev/disp api 1.0)
[    0.398679] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.402755] [uart]: used uart info.: 0x01
[    0.407342] [uart]: serial probe 0 irq 1 mapbase 0x01c28000
[    0.433634] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[    1.051478] console [ttyS0] enabled
[    1.057378] G2D: drv_g2d_init
[    1.065036] G2D: g2dmem: g2d_start=50000000, g2d_size=1000000
[    1.074019] G2D: head:d0000000,tail:d1000000
[    1.081624] G2D: Module initialized.major:251
[    1.089628] [drm] Initialized drm 1.1.0 20060810
[    1.096852] brd: module loaded
[    1.104103] loop: module loaded
[    1.110620] [NAND] nand driver version: 0x2 0x9
[    1.150795] Dev Sunxi softw311 nand: part 1, start 32768, size 32768
[    1.162494] Dev Sunxi softw311 nand: part 2, start 65536, size 32768
[    1.174157] Dev Sunxi softw311 nand: part 3, start 98304, size 65536
[    1.186074] Dev Sunxi softw311 nand: part 4, start 163840, size 1048576
[    1.198339] Dev Sunxi softw311 nand: part 5, start 1212416, size 3145728
[    1.210520] Dev Sunxi softw311 nand: part 6, start 4358144, size 32768
[    1.222526] Dev Sunxi softw311 nand: part 7, start 4390912, size 65536
[    1.234616] Dev Sunxi softw311 nand: part 8, start 4456448, size 262144
[    1.246706] Dev Sunxi softw311 nand: part 9, start 4718592, size 32768
[    1.258971] Dev Sunxi softw311 nand: part 10, start 4751360, size 1048576
[    1.271497] Dev Sunxi softw311 nand: part 11, start 5799936, size 9764864
[    1.284975]  nand: nanda nandb nandc nandd nande nandf nandg nandh nandi nandj nandk
[    1.296065] [NAND]nand driver, ok.
[    1.302986] sunxi_emac Using mii phy on PortA
[    1.321970] sunxi_emac Using MAC from FEX: 00:ce:39:b6:25:7e
[    1.334736] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.346633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.355083] [sw-ehci1]: open clock
[    1.381074] [sw-ehci1]: Set USB Power ON
[    1.391438] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.404935] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
[    1.417617] sw-ehci sw-ehci.1: irq 39, io mem 0x01c14000
[    1.438859] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
[    1.446864] ehci_irq: port change detect
[    1.454007] hub 1-0:1.0: USB hub found
[    1.460678] hub 1-0:1.0: 1 port detected
[    1.467043] [sw-ohci1]: open clock
[    1.496485] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    1.509633] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
[    1.520980] sw-ohci sw-ohci.1: irq 64, io mem 0x01c14400
[    1.591653] hub 2-0:1.0: USB hub found
[    1.598324] hub 2-0:1.0: 1 port detected
[    1.604663] [sw-ehci2]: open clock
[    1.630640] [sw-ehci2]: Set USB Power ON
[    1.640999] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.654491] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
[    1.666868] sw-ehci sw-ehci.2: irq 40, io mem 0x01c1c000
[    1.789894] usb 1-1: new high-speed USB device number 2 using sw-ehci
[    1.818850] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
[    1.826861] ehci_irq: port change detect
[    1.833995] hub 3-0:1.0: USB hub found
[    1.840659] hub 3-0:1.0: 1 port detected
[    1.847021] [sw-ohci2]: open clock
[    1.876465] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    1.889612] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
[    1.901029] sw-ohci sw-ohci.2: irq 65, io mem 0x01c1c400
[    1.971671] hub 4-0:1.0: USB hub found
[    1.978338] hub 4-0:1.0: 1 port detected
[    1.986343] Initializing USB Mass Storage driver...
[    1.996367] usbcore: registered new interface driver usb-storage
[    2.006013] USB Mass Storage support registered.
[    2.015594] usbcore: registered new interface driver ums-alauda
[    2.026562] usbcore: registered new interface driver ums-cypress
[    2.037601] usbcore: registered new interface driver ums-datafab
[    2.049045] usbcore: registered new interface driver ums_eneub6250
[    2.058082] hub 1-1:1.0: USB hub found
[    2.066851] usbcore: registered new interface driver ums-freecom
[    2.075862] hub 1-1:1.0: 4 ports detected
[    2.084808] usbcore: registered new interface driver ums-isd200
[    2.095833] usbcore: registered new interface driver ums-jumpshot
[    2.106750] usbcore: registered new interface driver ums-karma
[    2.117699] usbcore: registered new interface driver ums-onetouch
[    2.128827] usbcore: registered new interface driver ums-realtek
[    2.139776] usbcore: registered new interface driver ums-sddr09
[    2.150632] usbcore: registered new interface driver ums-sddr55
[    2.161401] usbcore: registered new interface driver ums-usbat
[    2.172378] usbcore: registered new interface driver usbserial
[    2.183744] usbcore: registered new interface driver usbserial_generic
[    2.194312] USB Serial support registered for generic
[    2.289889] usb 3-1: new high-speed USB device number 2 using sw-ehci
[    2.450352] usbserial: USB Serial Driver core
[    2.459358] usbcore: registered new interface driver cp210x
[    2.469090] USB Serial support registered for cp210x
[    2.478860] usbcore: registered new interface driver ftdi_sio
[    2.489989] USB Serial support registered for FTDI USB Serial Device
[    2.501280] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[    2.511762] usbcore: registered new interface driver ir-usb
[    2.521592] USB Serial support registered for IR Dongle
[    2.530137] ir_usb: v0.5:USB IR Dongle driver
[    2.539085] usbcore: registered new interface driver pl2303
[    2.548614] USB Serial support registered for pl2303
[    2.558256] mousedev: PS/2 mouse device common for all mice
[    2.566003] [kpad]: sw keypad init
[    2.573864] sw keypad fetch keypad uning configuration failed
[    2.586241] keypad: cannot find using configuration, return without doing anything!
[    2.599570] usb 1-1.3: new full-speed USB device number 3 using sw-ehci
[    2.611515] input: sun4i-keyboard as /devices/virtual/input/input0
[    2.622795] input: sunxi-ir as /devices/virtual/input/input1
[    2.629932] IR Initial OK
[    2.638106] ===========================hv_keypad_init=====================
[    2.648433] ========HV Inital ===================
[    2.657056] tkey_fetch_sysconfig_para: tkey_unused.
[    2.669289] hv_keypad_init: after fetch_sysconfig_para:  normal_i2c: 0x0. normal_i2c[1]: 0x0
[    2.683599] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[    2.692228] i2c /dev entries driver
[    2.699276] config i2c gpio with gpio_config api
[    2.709556] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
[    2.719238] i2c i2c-0: Invalid probe address 0x00
[    2.726980] I2C: i2c-0: AW16XX I2C adapter
[    2.736598] lirc_dev: IR Remote Control driver registered, major 250
[    2.746572] IR NEC protocol handler initialized
[    2.754894] IR RC5(x) protocol handler initialized
[    2.763242] IR RC6 protocol handler initialized
[    2.771305] IR JVC protocol handler initialized
[    2.779434] IR Sony protocol handler initialized
[    2.788605] IR RC5 (streamzap) protocol handler initialized
[    2.797845] IR SANYO protocol handler initialized
[    2.807408] IR MCE Keyboard/mouse protocol handler initialized
[    2.816688] IR LIRC bridge handler initialized
[    2.822943] [ace_drv] start!!!
[    2.828332] [ace_drv] init end!!!
[    2.833363] [pa_drv] start!!!
[    2.838526] [pa_drv] init end!!!
[    2.844349] axp20_ldo1: 1300 mV
[    2.853618] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
[    2.863715] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
[    2.874066] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
[    2.884222] axp20_buck2: 700 <--> 2275 mV at 1400 mV
[    2.894444] axp20_buck3: 700 <--> 3500 mV at 1250 mV
[    2.904301] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
[    2.918963] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input2
[    2.947151] axp20_ldo2: Failed to create debugfs directory
[    2.957318] sunxi_wdt: sunxi WatchDog Timer Driver v1.0
[    2.967403] sunxi_wdt: initialized (timeout=23s, nowayout=0)
[    2.976477] Bluetooth: HCI UART driver ver 2.2
[    2.984669] Bluetooth: HCI H4 protocol initialized
[    2.993378] Bluetooth: HCI BCSP protocol initialized
[    3.002002] Bluetooth: HCILL protocol initialized
[    3.009884] cpuidle: using governor ladder
[    3.016845] cpuidle: using governor menu
[    3.024842] [mmc_pm]: no sdio card used in configuration
[    3.032082] [mmc]: sunximmc_init
[    3.039568] [mmc]: sunxi mmc controller using config : 0x1
[    3.049971] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
[    3.058774] [mmc]: mmc 0 power off !!
[    3.069906] [mmc]: mmc0 Probe: base:0xf1c0f000 irq:32 dma:0 pdes:0xcfc00000, ret 0.
[    3.080004] sunxi_leds driver init
[    3.087191] Registered led device: red:ph10:led1
[    3.095535] Registered led device: blue:ph20:led2
[    3.112810] input: Logitech G500 as /devices/platform/sw-ehci.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input3
[    3.131577] generic-usb 0003:046D:C068.0001: input: USB HID v1.11 Mouse [Logitech G500] on usb-sw-ehci-1.3/input0
[    3.155817] input: Logitech G500 as /devices/platform/sw-ehci.1/usb1/1-1/1-1.3/1-1.3:1.1/input/input4
[    3.174998] generic-usb 0003:046D:C068.0002: input: USB HID v1.11 Keyboard [Logitech G500] on usb-sw-ehci-1.3/input1
[    3.190148] usbcore: registered new interface driver usbhid
[    3.198518] usbhid: USB HID core driver
[    3.210138] asoc: sndspdif <-> sunxi-spdif.0 mapping ok
[    3.223655] [I2S]sunxi-i2s cannot find any using configuration for controllers, return directly!
[    3.239842] [I2S]sndi2s cannot find any using configuration for controllers, return directly!
[    3.251766] IPv4 over IPv4 tunneling driver
[    3.258706] TCP: cubic registered
[    3.265235] Initializing XFRM netlink socket
[    3.273387] NET: Registered protocol family 10
[    3.281925] NET: Registered protocol family 17
[    3.289813] NET: Registered protocol family 15
[    3.298209] Bluetooth: RFCOMM TTY layer initialized
[    3.307256] Bluetooth: RFCOMM socket layer initialized
[    3.315104] Bluetooth: RFCOMM ver 1.11
[    3.323121] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.332608] Bluetooth: BNEP filters: protocol multicast
[    3.341009] 8021q: 802.1Q VLAN Support v1.8
[    3.349833] [mmc_pm]: No sdio card, please check your config !!
[    3.359426] Registering the dns_resolver key type
[    3.366074] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    3.382307] Registering SWP/SWPB emulation handler
[    3.391650] axp20_buck2: Failed to create debugfs directory
[    3.401060] registered taskstats version 1
[    3.409621] I2C: i2c-1: HDMI I2C adapter
[    3.435697] ParseEDID
[    3.542953] EDID version: 1.4
[    3.551755] PCLK=76300000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 60 NN
[    3.564455] PCLK=50870000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 40 NN
[    3.577191] disp_clk: Could not find a matching pll-freq for 50850000 pclk
[    3.589892] disp_clk: Could not find a matching pll-freq for 76300000 pclk
[    3.600772] EDID: No modes with good pixelclock found
[    3.611780] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
[    3.624402] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[    4.057872] [mmc]: mmc 0 detect change, present 1
[    4.356748] [mmc]: mmc 0 power on !!
[    4.398122] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 52,  RTO !!
[    4.410871] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 52,  RTO !!
[    4.438111] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5,  RTO !!
[    4.450673] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5,  RTO !!
[    4.463238] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5,  RTO !!
[    4.475803] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5,  RTO !!
[    4.531515] mmc0: new high speed SDHC card at address 0007
[    4.568156] mmcblk0: mmc0:0007 SD8GB 7.42 GiB
[    4.597666]  mmcblk0: p1 p2
[    4.847142] Console: switching to colour frame buffer device 160x45
[    4.874931] axp20_buck3: incomplete constraints, leaving on
[    4.885284] axp20_buck2: incomplete constraints, leaving on
[    4.895551] axp20_ldo4: incomplete constraints, leaving on
[    4.905726] axp20_ldo3: incomplete constraints, leaving on
[    4.915897] axp20_ldo2: incomplete constraints, leaving on
[    4.926075] axp20_ldo1: incomplete constraints, leaving on
[    4.939188] sunxi-rtc sunxi-rtc: setting system clock to 2017-09-18 10:10:59 UTC (1505729459)
[    4.949721] ALSA device list:
[    4.955734]   #0: sunxi-CODEC  Audio Codec
[    4.962027]   #1: sunxi-sndspdif
[    4.967363]   #2: sunxi-sndhdmi
[    4.981239] kjournald starting.  Commit interval 5 seconds
[    4.991006] EXT3-fs (mmcblk0p2): using internal journal
[    5.002095] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[    5.013983] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    5.023901] devtmpfs: mounted
[    5.029791] Freeing init memory: 176K
[    5.306440] systemd[1]: systemd 206 running in system mode. (-PAM +LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP -GCRYPT +ACL +XZ)
[    5.340792] systemd[1]: Set hostname to <meleg>.
[    5.627981] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    5.642835] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.655254] systemd[1]: Expecting device dev-ttyS0.device...
[    5.689490] systemd[1]: Expecting device dev-ttyUSB0.device...
[    5.718164] systemd[1]: Starting Syslog Socket.
[    5.748485] systemd[1]: Listening on Syslog Socket.
[    5.757549] systemd[1]: Starting Remote File Systems.
[    5.789180] systemd[1]: Reached target Remote File Systems.
[    5.799979] systemd[1]: Expecting device dev-multi-user.device...
[    5.829019] systemd[1]: Starting Delayed Shutdown Socket.
[    5.859348] systemd[1]: Listening on Delayed Shutdown Socket.
[    5.870845] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    5.900573] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.910949] systemd[1]: Starting Root Slice.
[    5.938317] systemd[1]: Created slice Root Slice.
[    5.947444] systemd[1]: Starting User and Session Slice.
[    5.979364] systemd[1]: Created slice User and Session Slice.
[    5.988715] systemd[1]: Starting System Slice.
[    6.018490] systemd[1]: Created slice System Slice.
[    6.026429] systemd[1]: Starting Slices.
[    6.048035] systemd[1]: Reached target Slices.
[    6.058556] systemd[1]: Starting system-usb\x2dserial\x2dtouchscreen.slice.
[    6.090997] systemd[1]: Created slice system-usb\x2dserial\x2dtouchscreen.slice.
[    6.102521] systemd[1]: Starting system-getty.slice.
[    6.129019] systemd[1]: Created slice system-getty.slice.
[    6.139396] systemd[1]: Starting system-serial\x2dgetty.slice.
[    6.169873] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.180619] systemd[1]: Starting udev Kernel Socket.
[    6.208932] systemd[1]: Listening on udev Kernel Socket.
[    6.218719] systemd[1]: Starting udev Control Socket.
[    6.248998] systemd[1]: Listening on udev Control Socket.
[    6.258208] systemd[1]: Starting Journal Socket.
[    6.288582] systemd[1]: Listening on Journal Socket.
[    6.302278] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.344836] systemd[1]: Started Load Kernel Modules.
[    6.354991] systemd[1]: Mounting FUSE Control File System...
[    6.391435] systemd[1]: Mounting Configuration File System...
[    6.452561] systemd[1]: Starting Apply Kernel Variables...
[    6.507743] systemd[1]: Mounted Huge Pages File System.
[    6.520972] systemd[1]: Mounted POSIX Message Queue File System.
[    6.532599] systemd[1]: Starting udev Coldplug all Devices...
[    6.560766] systemd[1]: Mounting Debug File System...
[    6.590689] systemd[1]: Starting Journal Service...
[    6.648513] systemd[1]: Started Journal Service.
[    6.660483] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.700210] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.715691] systemd[1]: Starting Paths.
[    6.727947] systemd[1]: Reached target Paths.
[    6.740478] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.783123] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.803982] systemd[1]: Started Set Up Additional Binary Formats.
[    6.813023] systemd[1]: Starting Swap.
[    6.837923] systemd[1]: Reached target Swap.
[    6.847445] systemd[1]: Started File System Check on Root Device.
[    6.859392] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.890790] systemd[1]: Mounting Temporary Directory...
[    7.039476] systemd[1]: Mounted FUSE Control File System.
[    7.086583] systemd[1]: Mounted Configuration File System.
[    7.138877] systemd[1]: Started Apply Kernel Variables.
[    7.218570] systemd[1]: Mounted Debug File System.
[    7.260203] systemd[1]: Started Remount Root and Kernel File Systems.
[    7.308811] systemd[1]: Mounted Temporary Directory.
[    7.352713] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.389101] systemd[1]: Started udev Coldplug all Devices.
[    7.403029] systemd[1]: Starting Create static device nodes in /dev...
[    7.431192] systemd[1]: Starting Load/Save Random Seed...
[    7.462185] systemd[1]: Started Machine ID first boot configure.
[    7.509963] systemd[1]: Started Create static device nodes in /dev.
[    7.538788] systemd[1]: Started Load/Save Random Seed.
[    7.549090] systemd[1]: Starting udev Kernel Device Manager...
[    7.581366] systemd[1]: Starting Local File Systems (Pre).
[    7.615504] systemd-udevd[75]: starting version 206
[    7.625738] systemd[1]: Reached target Local File Systems (Pre).
[    7.636563] systemd[1]: Mounting /var/volatile...
[    7.664959] systemd[1]: var-volatile.mount: Directory /var/volatile to mount over is not empty, mounting anyway.
[    7.749333] systemd[1]: Started udev Kernel Device Manager.
[    7.858284] systemd[1]: Mounted /var/volatile.
[    7.867031] systemd[1]: Starting Local File Systems.
[    7.979240] systemd[1]: Reached target Local File Systems.
[    8.019365] systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
[    8.135842] systemd[1]: Starting Recreate Volatile Files and Directories...
[    8.516425] systemd[1]: Starting Sound Card.
[    8.628592] systemd[1]: Reached target Sound Card.
[    8.780489] systemd[1]: Started Recreate Volatile Files and Directories.
[    8.841611] systemd[1]: Starting Update UTMP about System Reboot/Shutdown...
[    8.962424] systemd[1]: Started Run pending postinsts.
[    9.064382] usbcore: registered new interface driver rtl8192cu
[    9.098626] systemd[1]: Found device /dev/ttyS0.
[    9.251821] systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
[    9.460576] systemd[1]: Started Update UTMP about System Reboot/Shutdown.
[    9.510912] systemd[1]: Starting System Initialization.
[    9.580122] systemd[1]: Reached target System Initialization.
[    9.620825] systemd[1]: Started Manage Sound Card State (restore and store).
[    9.683848] systemd[1]: Starting Restore Sound Card State...
[    9.751223] systemd[1]: Starting dropbear.socket.
[    9.858818] systemd[1]: Listening on dropbear.socket.
[    9.870033] systemd[1]: Starting Avahi mDNS/DNS-SD Stack Activation Socket.
[   10.001081] systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[   10.061551] systemd[1]: Starting Daily Cleanup of Temporary Directories.
[   10.127250] systemd[1]: Started Daily Cleanup of Temporary Directories.
[   10.192791] systemd[1]: Starting Timers.
[   10.228094] systemd[1]: Reached target Timers.
[   10.237835] systemd[1]: Starting D-Bus System Message Bus Socket.
[   10.280044] systemd[1]: Listening on D-Bus System Message Bus Socket.
[   10.297599] systemd[1]: Starting Sockets.
[   10.328130] systemd[1]: Reached target Sockets.
[   10.336266] systemd[1]: Starting Basic System.
[   10.358567] systemd[1]: Reached target Basic System.
[   10.367841] systemd[1]: Starting Connection service...
[   10.390988] systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
[   10.422067] systemd[1]: Starting LSB: Remove /etc/nologin at boot...
[   10.467856] systemd[1]: Started SSH Key Generation.
[   10.481527] systemd[1]: Starting Set CPU governor to performance...
[   10.511181] systemd[1]: Starting Kernel Logging Service...
[   10.578977] systemd[1]: Started Kernel Logging Service.
[   10.599481] systemd[1]: Starting System Logging Service...
[   10.668948] systemd[1]: Started System Logging Service.
[   10.687523] systemd[1]: Starting Permit User Sessions...
[   10.730155] systemd[1]: Starting Login Service...
[   10.771108] systemd[1]: Starting D-Bus System Message Bus...
[   10.829126] systemd[1]: Started D-Bus System Message Bus.
[   10.853150] systemd[1]: Starting Xserver startup with a display manager...
[   10.960325] systemd[1]: Started Xserver startup with a display manager.
[   11.012818] systemd[1]: Starting Calaos home automation touchscreen UI...
[   11.110213] systemd[1]: Started Calaos home automation touchscreen UI.
[   11.189105] systemd[1]: Started Restore Sound Card State.
[   11.260086] systemd[1]: Started LSB: Remove /etc/nologin at boot.
[   11.309712] systemd[1]: Started Set CPU governor to performance.
[   11.358753] systemd[1]: Started Permit User Sessions.
[   11.382247] systemd[1]: Starting Getty on tty1...
[   11.448168] systemd[1]: Started Getty on tty1.
[   11.457317] systemd[1]: Starting Serial Getty on ttyS0...
[   11.527400] systemd[1]: Started Serial Getty on ttyS0.
[   11.548959] systemd[1]: Starting Login Prompts.
[   11.590034] systemd[1]: Reached target Login Prompts.
[   12.267695] Warning: this sunxi disp driver will see significant redesign.
[   12.304059] Applications using /dev/disp directly will break.
[   12.343118] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver
[   12.407734] [DISP] layer allocated: 0,101
[   12.513563] UMP<2>: Inserting UMP device driver. Compiled: Sep 11 2014, time: 17:57:08
[   12.573413] UMP<2>: Using OS memory backend, allocation limit: 134217728
[   12.620754] UMP: UMP device driver  loaded
[   12.673450] Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x51000000, size=33554432)
[   12.760766] mali: use config clk_div 4
[   12.784340] mali: clk_div 4
[   12.800787] Mali: mali clock set completed, clock is  240000000 Hz
[   12.859468] mali: use config clk_div 4
[   12.879975] mali: clk_div 4
[   12.895124] Mali: mali clock set completed, clock is  240000000 Hz
[   12.939162] Mali: Mali device driver loaded
[   13.021074] Mali DRM initialize, driver name: mali_drm, version 2.1
[   13.075386] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
[   13.107917] Mali DRM initialize, driver name: mali_drm, version 2.1
[   13.152061] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
[   13.622356] [cedar dev]: install start!!!
[   13.648055] [cedar dev]: install end!!!
[   13.653960] UMP<2>: New session opened
[   14.571382] sunxi_emac sunxi_emac.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[   14.637598] UMP<2>: New session opened
[   15.306235] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[   15.415777] ParseEDID
[   15.539176] EDID version: 1.4
[   15.556572] PCLK=76300000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 60 NN
[   15.616410] PCLK=50870000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 40 NN
[   15.670364] disp_clk: Could not find a matching pll-freq for 50850000 pclk
[   15.676192] disp_clk: Could not find a matching pll-freq for 76300000 pclk
[   21.848419] sunxi-rtc sunxi-rtc: actually set time to 2017-9-18 10:11:16
[  207.889940] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[  208.039256] ParseEDID
[  208.163760] EDID version: 1.4
[  208.187696] PCLK=76300000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 60 NN
[  208.228602] PCLK=50870000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 40 NN
[  208.268471] disp_clk: Could not find a matching pll-freq for 50850000 pclk
[  208.281786] disp_clk: Could not find a matching pll-freq for 76300000 pclk

=> La connexion de l'usb pour le coté tactile à eu lieu à partir de 207...

Et voici le lsusb -vvv :

Code:
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         1 Single TT
 bMaxPacketSize0        64
 idVendor           0x05e3 Genesys Logic, Inc.
 idProduct          0x0608 USB-2.0 4-Port HUB
 bcdDevice           77.64
 iManufacturer           0
 iProduct                1 USB2.0 Hub
 iSerial                 0
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           25
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower              100mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         9 Hub
     bInterfaceSubClass      0 Unused
     bInterfaceProtocol      0 Full speed (or root) hub
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0001  1x 1 bytes
       bInterval              12
Hub Descriptor:
 bLength               9
 bDescriptorType      41
 nNbrPorts             4
 wHubCharacteristic 0x00e0
   Ganged power switching
   Ganged overcurrent protection
   TT think time 32 FS bits
   Port indicators
 bPwrOn2PwrGood       50 * 2 milli seconds
 bHubContrCurrent    100 milli Ampere
 DeviceRemovable    0x00
 PortPwrCtrlMask    0xff
Hub Port Status:
  Port 1: 0000.0100 power
  Port 2: 0000.0100 power
  Port 3: 0000.0103 power enable connect
  Port 4: 0000.0100 power
Device Qualifier (for other device speed):
 bLength                10
 bDescriptorType         6
 bcdUSB               2.00
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         0 Full speed (or root) hub
 bMaxPacketSize0        64
 bNumConfigurations      1
Device Status:     0x0001
 Self Powered

Bus 003 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0        64
 idVendor           0x0bda Realtek Semiconductor Corp.
 idProduct          0x8176 RTL8188CUS 802.11n WLAN Adapter
 bcdDevice            2.00
 iManufacturer           1 Realtek
 iProduct                2 802.11n WLAN Adapter
 iSerial                 3 00e04c000001
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           46
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0x80
     (Bus Powered)
   MaxPower              500mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           4
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass    255 Vendor Specific Subclass
     bInterfaceProtocol    255 Vendor Specific Protocol
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x02  EP 2 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x03  EP 3 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x84  EP 4 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0040  1x 64 bytes
       bInterval               1
Device Qualifier (for other device speed):
 bLength                10
 bDescriptorType         6
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0        64
 bNumConfigurations      1
Device Status:     0x0000
 (Bus Powered)

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         0 Full speed (or root) hub
 bMaxPacketSize0        64
 idVendor           0x1d6b Linux Foundation
 idProduct          0x0002 2.0 root hub
 bcdDevice            3.04
 iManufacturer           3 Linux 3.4.79 ehci_hcd
 iProduct                2 SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
 iSerial                 1 sw-ehci
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           25
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower                0mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         9 Hub
     bInterfaceSubClass      0 Unused
     bInterfaceProtocol      0 Full speed (or root) hub
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0004  1x 4 bytes
       bInterval              12
Hub Descriptor:
 bLength               9
 bDescriptorType      41
 nNbrPorts             1
 wHubCharacteristic 0x000a
   No power switching (usb 1.0)
   Per-port overcurrent protection
 bPwrOn2PwrGood       10 * 2 milli seconds
 bHubContrCurrent      0 milli Ampere
 DeviceRemovable    0x00
 PortPwrCtrlMask    0xff
Hub Port Status:
  Port 1: 0000.0503 highspeed power enable connect
Device Status:     0x0001
 Self Powered

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               1.10
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         0 Full speed (or root) hub
 bMaxPacketSize0        64
 idVendor           0x1d6b Linux Foundation
 idProduct          0x0001 1.1 root hub
 bcdDevice            3.04
 iManufacturer           3 Linux 3.4.79 ohci_hcd
 iProduct                2 SW USB2.0 'Open' Host Controller (OHCI) Driver
 iSerial                 1 sw-ohci
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           25
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower                0mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         9 Hub
     bInterfaceSubClass      0 Unused
     bInterfaceProtocol      0 Full speed (or root) hub
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0002  1x 2 bytes
       bInterval             255
Hub Descriptor:
 bLength               9
 bDescriptorType      41
 nNbrPorts             1
 wHubCharacteristic 0x0012
   No power switching (usb 1.0)
   No overcurrent protection
 bPwrOn2PwrGood        2 * 2 milli seconds
 bHubContrCurrent      0 milli Ampere
 DeviceRemovable    0x00
 PortPwrCtrlMask    0xff
Hub Port Status:
  Port 1: 0000.0100 power
Device Status:     0x0001
 Self Powered

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         0 Full speed (or root) hub
 bMaxPacketSize0        64
 idVendor           0x1d6b Linux Foundation
 idProduct          0x0002 2.0 root hub
 bcdDevice            3.04
 iManufacturer           3 Linux 3.4.79 ehci_hcd
 iProduct                2 SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
 iSerial                 1 sw-ehci
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           25
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower                0mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         9 Hub
     bInterfaceSubClass      0 Unused
     bInterfaceProtocol      0 Full speed (or root) hub
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0004  1x 4 bytes
       bInterval              12
Hub Descriptor:
 bLength               9
 bDescriptorType      41
 nNbrPorts             1
 wHubCharacteristic 0x000a
   No power switching (usb 1.0)
   Per-port overcurrent protection
 bPwrOn2PwrGood       10 * 2 milli seconds
 bHubContrCurrent      0 milli Ampere
 DeviceRemovable    0x00
 PortPwrCtrlMask    0xff
Hub Port Status:
  Port 1: 0000.0503 highspeed power enable connect
Device Status:     0x0001
 Self Powered

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               1.10
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         0 Full speed (or root) hub
 bMaxPacketSize0        64
 idVendor           0x1d6b Linux Foundation
 idProduct          0x0001 1.1 root hub
 bcdDevice            3.04
 iManufacturer           3 Linux 3.4.79 ohci_hcd
 iProduct                2 SW USB2.0 'Open' Host Controller (OHCI) Driver
 iSerial                 1 sw-ohci
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           25
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower                0mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         9 Hub
     bInterfaceSubClass      0 Unused
     bInterfaceProtocol      0 Full speed (or root) hub
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0002  1x 2 bytes
       bInterval             255
Hub Descriptor:
 bLength               9
 bDescriptorType      41
 nNbrPorts             1
 wHubCharacteristic 0x0012
   No power switching (usb 1.0)
   No overcurrent protection
 bPwrOn2PwrGood        2 * 2 milli seconds
 bHubContrCurrent      0 milli Ampere
 DeviceRemovable    0x00
 PortPwrCtrlMask    0xff
Hub Port Status:
  Port 1: 0000.0100 power
Device Status:     0x0001
 Self Powered

Bus 001 Device 003: ID 046d:c068 Logitech, Inc. G500 Laser Mouse
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0         8
 idVendor           0x046d Logitech, Inc.
 idProduct          0xc068 G500 Laser Mouse
 bcdDevice           58.02
 iManufacturer           1 Logitech
 iProduct                2 G500
 iSerial                 3 C54E30C03F0018
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           59
   bNumInterfaces          2
   bConfigurationValue     1
   iConfiguration          4 U58.02_B0018
   bmAttributes         0xa0
     (Bus Powered)
     Remote Wakeup
   MaxPower               98mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         3 Human Interface Device
     bInterfaceSubClass      1 Boot Interface Subclass
     bInterfaceProtocol      2 Mouse
     iInterface              0
       HID Device Descriptor:
         bLength                 9
         bDescriptorType        33
         bcdHID               1.11
         bCountryCode            0 Not supported
         bNumDescriptors         1
         bDescriptorType        34 Report
         wDescriptorLength      67
        Report Descriptors:
          ** UNAVAILABLE **
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0008  1x 8 bytes
       bInterval               1
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        1
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         3 Human Interface Device
     bInterfaceSubClass      0 No Subclass
     bInterfaceProtocol      0 None
     iInterface              0
       HID Device Descriptor:
         bLength                 9
         bDescriptorType        33
         bcdHID               1.11
         bCountryCode            0 Not supported
         bNumDescriptors         1
         bDescriptorType        34 Report
         wDescriptorLength     122
        Report Descriptors:
          ** UNAVAILABLE **
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x82  EP 2 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0014  1x 20 bytes
       bInterval               1
Device Status:     0x0000
 (Bus Powered)


Si tu as besoin d'autre chose, n'hésite pas.
Reply


Messages In This Thread
Ecran 10p - by captainigloo - 07-13-2014, 06:54 PM
RE: Ecran 10p - by tiramiseb - 07-13-2014, 09:18 PM
RE: Ecran 10p - by raoulh - 07-14-2014, 08:31 AM
RE: Ecran 10p - by Tinade - 08-15-2014, 11:50 PM
RE: Ecran 10p - by Arnaud - 08-16-2014, 12:05 AM
RE: Ecran 10p - by tiramiseb - 08-17-2014, 05:15 PM
RE: Ecran 10p - by Tinade - 09-13-2014, 03:33 AM
RE: Ecran 10p - by Tinade - 09-14-2014, 03:36 PM
RE: Ecran 10p - by captainigloo - 09-15-2014, 08:05 PM
RE: Ecran 10p - by tiramiseb - 09-17-2014, 07:43 PM
RE: Ecran 10p - by captainigloo - 09-17-2014, 08:47 PM
RE: Ecran 10p - by tiramiseb - 09-17-2014, 09:02 PM
RE: Ecran 10p - by captainigloo - 09-17-2014, 10:58 PM
RE: Ecran 10p - by captainigloo - 09-17-2014, 11:47 PM
RE: Ecran 10p - by raoulh - 09-18-2014, 08:44 AM
RE: Ecran 10p - by captainigloo - 09-20-2014, 09:41 AM
RE: Ecran 10p - by tiramiseb - 09-23-2014, 08:43 PM
RE: Ecran 10p - by maktibab - 09-23-2014, 04:23 PM
RE: Ecran 10p - by tiramiseb - 09-23-2014, 06:07 PM
RE: Ecran 10p - by captainigloo - 09-28-2014, 10:45 AM
RE: Ecran 10p - by tiramiseb - 09-29-2014, 10:00 PM
RE: Ecran 10p - by diouk - 09-29-2014, 10:11 PM
RE: Ecran 10p - by tiramiseb - 09-29-2014, 10:15 PM
RE: Ecran 10p - by diouk - 09-29-2014, 10:19 PM
RE: Ecran 10p - by tiramiseb - 09-29-2014, 10:20 PM
RE: Ecran 10p - by tiramiseb - 09-30-2014, 09:11 AM
RE: Ecran 10p - by captainigloo - 09-30-2014, 08:08 PM
RE: Ecran 10p - by tiramiseb - 11-07-2014, 03:21 PM
RE: Ecran 10p - by thierry - 12-11-2014, 01:32 PM
RE: Ecran 10p - by Kent1 - 07-02-2015, 08:23 PM
RE: Ecran 10p - by tiramiseb - 07-02-2015, 08:31 PM
RE: Ecran 10p - by Kent1 - 07-04-2015, 09:48 PM
RE: Ecran 10p - by Tinade - 08-25-2017, 09:17 PM
RE: Ecran 10p - by raoulh - 08-28-2017, 08:30 AM
RE: Ecran 10p - by maktibab - 08-29-2017, 07:40 PM
RE: Ecran 10p - by raoulh - 08-29-2017, 09:17 PM
RE: Ecran 10p - by Tinade - 08-30-2017, 07:01 PM
RE: Ecran 10p - by raoulh - 08-31-2017, 09:01 AM
RE: Ecran 10p - by raoulh - 08-31-2017, 10:16 AM
RE: Ecran 10p - by Tinade - 08-31-2017, 06:33 PM
RE: Ecran 10p - by Tinade - 08-31-2017, 06:14 PM
RE: Ecran 10p - by maktibab - 09-18-2017, 10:04 AM
RE: Ecran 10p - by maktibab - 09-18-2017, 10:36 AM
RE: Ecran 10p - by raoulh - 09-22-2017, 10:35 AM
RE: Ecran 10p - by maktibab - 09-25-2017, 05:16 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)